Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts


Tiki 21

Sub-space to get into nitty gritty of building and sailing Tiki 21s.

Members: 103
Latest Activity: Mar 18, 2021

Links to member pages:

Scott and Mike (Seattle, WA, USA) | Photos

Discussion Forum

Tiki 21'adventures 7 Replies

Hello, I'm french so excuse my english, as you know french are very bad at language !I'm also new in this group and not used to forum.Let's begin ! This summer i had the chance to sail over bretain…Continue

Started by Ma rion. Last reply by Éric Bouvéron Mar 18, 2021.

Can a T21 be assembled single-handed? 8 Replies

I'm reconsidering my T26 build as I think about the issue of assembly for launch.I love the T21 design, and wonder if that would be easier to assembly by myself? I don't want to do some fancy…Continue

Started by Michael Cook. Last reply by friendshipsloop . Mar 17, 2021.

Dolphin striker? 7 Replies

I am currently in the process of painting my recently purchased secondhand Tiki 21. I have not seen or sailed a Tiki 21 before and am curious about the dolphin striker. I would appreciate if anyone…Continue

Started by Paul Norfolk. Last reply by Paul Norfolk Jan 22, 2021.

Apology and redirection... Engine options on Tiki 21 2 Replies

Sorry everyone in the Tiki 21 group... I just posted my question as a message to all, instead of a discussion. Hope that doesn't cause anyone any stress. I'll learn!!Here it is... was....Hi everyone!…Continue

Tags: 21, Tiki, sled, placement, Engine

Started by Steve Burrage. Last reply by Robin Graham Oct 7, 2020.

Comment Wall

Comment by Airton Ferreira Viegas on March 25, 2019 at 1:34pm

Hello people

I am just arriving to Wharram world. Starting building a TIki 21. After sepent a week readind the plans, I am cutting drawing and cutting the bulkheads, and hulls panels for the first hull;

I will need for help, a lot! There is the language barrier, I speek Portuguese, and the age,I am 67 years old.

I am following the plans exacthy as it wrote in the plan's sheets. 

In the design it is indicated to fasten the hull panel on the keel with wire loop.
You need to drill the panel. Is this usual? There is no other method less
laborious or invasive.

Comment by Rune M. Christensen on March 28, 2019 at 6:37am

I am not completely sure what you mean.  Are you referring to holes drilled in the hull panels used to tie the hull panels and the bulkheads together?

If so, yes this is probably necessary. The holes will afterwards be cowered with the fillets, or you can fill them with thickened epoxy. There will also be a layer of glass fiber on top.

It seems strange to drill holes in the hull, but it’s really no problem.


Comment by Airton Ferreira Viegas on March 28, 2019 at 8:43am
Yes, I was referring to those holes. I was thinking about to change the wire stichs for stainless steel screws.
Comment by Rune M. Christensen on March 28, 2019 at 8:59am

You could use screws, but the bulkheads are of relatively thin plywood, so it is difficult. And I would remove the screws when the bulkheads are glued in anyway.

I used cable ties instead of wire. Also perhaps not as many as in the plans. You just need to hold it in place until it is glued.

Comment by Rod McLaren on March 28, 2019 at 10:43am

Rune is giving you good advice. The Tiki 21 is built using the "stitch and glue" method. The method was designed in order to make use of epoxy and its additives during boat construction. The epoxy provides the strength - it is stronger than the wood it is joining. The copper wire (or zip ties) are used to hold the wood in place while the epoxy sets. And then, as Rune has indicated, the wire is removed and the holes that were created are filled with epoxy and additive. I have built a Tiki 21 using copper wires, and recently I built a Mana 24 using zip ties. Both ways work fine - the zip ties are a bit faster and easier. Wishing you much success on your build.


You need to be a member of Tiki 21 to add comments!


Members (103)


© 2022   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service