Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

Building Wharrams
  • Male
  • Thailand
Share on Facebook Share

Building Wharrams's Friends

  • Olivier R.
  • Axel
  • Björn

Building Wharrams's Discussions

Selling in Belgium 5x 18mm and 18x 10mm Bruynzeel Hechthout + Oregon Pine
1 Reply

Hello I'm Marcel, you might have seen some videos of me on this site building a Tiki 38.Me and my family and my Tiki 38 project are relocating from Belgium to Thailand in just a couple of months. I…Continue

Tags: pine, oregon, multiplex

Started this discussion. Last reply by Martin Keuchel Feb 19.

Leaving the pumps on the epoxy containers?
5 Replies

Can I leave the pumps on the epoxy containers over a longer period of time or should I remove the pumps and close the containers after each use?

Tags: epoxy, tiki38, wharram

Started this discussion. Last reply by Sean Maguire Nov 19, 2017.

Is it recommended to coat whole sheets of plywood with epoxy before any cutting?
12 Replies

More specific, should I first coat with epoxy the 18mm sheets that I am using for the backbone parts? I have read this recommendation on Neil's blog in a comment by Thomas Nielsen ( …Continue

Tags: cutting, plywood, tiki38

Started this discussion. Last reply by Stewart Coates Oct 23, 2017.

Sanders recommendation needed for Tiki 38
5 Replies

I am going to buy sanders from the Festool brand and I would like some advice on which type of sanders of their range are most suitable for my Tiki 38 project.…Continue

Tags: tiki38

Started this discussion. Last reply by Chuck Valley Sep 20, 2017.

Gifts Received

Gift

Building Wharrams has not received any gifts yet

Give a Gift

 

Building Wharrams's Page

Latest Activity

Building Wharrams posted videos
Wednesday
Building Wharrams posted a video

Sanding, drilling vent holes and epoxy the deck stringer in place - Wharram Hitia 14

In this video I first move the stands so that the boat is standing more stable while I am working on it. You will also see that I started sanding everything....
Monday
Building Wharrams posted a video

Start on fitting the fore and aft deck on hull 1 - Wharram Hitia 14

The basic fillets for one hull are done. I start with a clean up of the shop. Now I am going to see how to fit the fore and aft deck. While I am looking at i...
Nov 9
Building Wharrams posted a video

Making the bulkhead fillets - Wharram Hitia 14

In this video I am making the fillets on the bulkheads of one of the hulls. The more I practice the better the fillets get. It has been more than 10 days sin...
Nov 8
Building Wharrams posted a video

Finish making the fillets on the keel, sternpost and stempost of hull 1

In this video I finish making the fillets on the keel, sternpost and stempost of hull 1.
Oct 28
Building Wharrams posted a video

Making the keel fillet between bulkhead 4 and 3 - Wharram Hitia 14

In this video I am making the keel fillet between bulkhead 4 and 3. I am lightly sanding the areas where I am going to apply the fillets, then I clean the ar...
Oct 27
Building Wharrams posted a video

Start of making the fillets - Wharram Hitia 14

In this video I start with making the fillets for the keel. First I stitch and clamp the side panels to the sternpost which were still not together. I had to...
Oct 24
Building Wharrams posted a video

Stitching bulkhead 1 and 4 in place - Wharram Hitia 14

In this video I stitch bulkhead 1 and 4 in place. Afterwards I am spatula's with 2,5cm radius out of thin plywood, which I will use for making the keel and b...
Oct 23
Building Wharrams posted a video

Stitching bulkhead 3 and 2 in place - Wharram Hitia 14

In this video I am stitching bulkhead 3 and 2 in place in one of the hulls.
Oct 22
Building Wharrams posted a video

Bulkhead work and making fillets on the stands - Wharram Hitia 14

In this video I am glueing stiffeners and deck supports on the bulkheads and I am adding fillets for more strength on the stands.
Oct 20
Building Wharrams posted a video

More work on the bulkheads and making the first stand for one hull - Wharram Hitia 14

In this video I first clean up the workshop. Then I do some work on placing the stiffeners and deck supports on 2 bulkheads (again). I also assemble one of t...
Oct 16
Building Wharrams posted a video

Glueing stiffeners & deck supports again, but now on the correct side :) - Wharram Hitia 14 Ep.25

In this video I am glueing the stiffeners and deck supports again on the bulkheads, but now on the correct side. I discovered this mistake a couple of days a...
Oct 15
Building Wharrams posted a video

Stitching the side panels of the second hull together - Wharram Hitia 14 Ep.24

In this video I am stitching the side panels of the second hull together. At the end of the video I am taking a look at the drawings to see how to stitch the...
Oct 12
Building Wharrams posted a video

Glue the stiffeners and deck supports to the bulkheads - Wharram Hitia 14 Ep. 23

In this video I am glueing the stiffeners and deck supports to the bulkheads. I also have started stitching the second hull.
Oct 9
Building Wharrams posted a video

Making deck support and stiffeners for the bulkheads - Wharram Hitia 14 Ep.22

In this video I first remove possible residue wax (amine blush) from the bulkheads which have 2 coats of epoxy. Then I continue with making the deck supports...
Oct 5
Building Wharrams posted a video

Stitching the stempost and keel to the side panels - Wharram Hitia 14 Ep.21

In this video I am stitching the stempost and keel to the side panels. The first few stitches took some time, but soon after I was doing the stitches very fa...
Oct 4

Profile Information

I am:
A home builder
What boat (s) are you building or do you own?
Building Wharrams
Country, City, and State?
Belgium
About me or us?
My name is Marcel. I'm building a Wharram design sailboats.
Looking to?
Building Wharrams
Website:
http://svsatoshi.com

Building Wharrams's Photos

  • Add Photos
  • View All

Building Wharrams's Videos

  • Add Videos
  • View All

Comment Wall

  • No comments yet!

You need to be a member of Wharram Builders and Friends to add comments!

Join Wharram Builders and Friends

 
 
 

© 2018   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service