Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

Caught between CVG or #2 or Better Douglas Fir choice

I know CVG is better or is it necessary for a Tiki 38 build?

Views: 197

▶ Reply to This

Replies to This Discussion

Permalink Reply by Blair R on September 20, 2023 at 4:36pm

Ordered 500 LF VGC 1x6 for a Tiki 38 Build. Any current Tiki 38 builders in the US to compare notes with? Found some great sources for epoxy and plywood. Any builders interested let me know.

Permalink Reply by Jeff on October 4, 2023 at 3:25pm

In the planning stages for my Tiki 38 build.  I am also interested in your material sources.

Permalink Reply by Blair R on October 5, 2023 at 10:57am

Where are you located? We are in Northern MN. Have you purchased palns? What hull number?

Best regards,

Blair

Permalink Reply by Jeff on October 5, 2023 at 12:58pm

Located in Washington State on the Columbia River.  Plans have been purchased!  Hull #179.

-Jeff

Permalink Reply by Blair R on October 6, 2023 at 11:02am

I have #176, sweet. Yes, lets have a conversation. Just send a friend request.

Permalink Reply by Blair R on October 14, 2023 at 6:07am
I sourced the Douglas Fir locally it was VGC 4s 1x6 16' lengths just over $7 LBF.
Permalink Reply by Jeff on October 15, 2023 at 5:24pm

Blair,

I sent you a message in case you did not see it.

▶ Reply to Discussion

RSS

© 2024   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service