A Photo & Discussion Forum for Wharram Design Enthusiasts
Anybody with some ideas trying to move my 28 foot Wharram three blocks to the boat ramp, thank you from Texas
Tags:
Thank Buddy
Looks good thanks
You didn't say if your boat was assembled or not or if the three blocks were hilly or flat. I would get a permit to move it early in the morning (if in a built up area) and a) if it were one hull at a time I'd use a simple plywood cradle with wheelbarrow wheels and a few helpers and push it. If b) fully assembled it would need a more substantial cradle I suspect and more of a crude trailer design with vehicle support.
The builder if my tiki 26 moved one hull at a time 1km to a beach, on his own using the simple cradle method above.
I'm sure you will figure something out
Thanks for your help, I got her to fly for the 3 blocks to the bay!
Woohoo! That's way better than pushing.
Glad it's worked out for you
Thx
© 2024 Created by Budget Boater. Powered by