Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

I'm looking for plywood to build my hitia 14.  I'm living in Okinawa, Japan right now, and I don't speak very much Japanese.  I've looked at two local stores and they only have one type of plywood. They can't tell me any details about it so i don't know the species or if it is marine grade. I did 5 boil and bake cycles on it and it looks like it's barely starting to delaminate on one of the pieces.  Just checking to see what you guys think.

Views: 657

Reply to This

Replies to This Discussion

You will be fine mate.

Thank you

paul anderson said:

You will be fine mate.

The biggest threat to ply imho is freshwater ingress.

We see plywood that appears similiarr to this. We refer to it as doorskin. We use it for templates. We frequently find inferior quality plies inside the outer plies are very thin compared to thicker center ply. This is not balanced and is not near as strong as three equal plies.  I would not recommend this plywood for anything that was not disposable.

I'm going to continue my search for plywood but I was hoping this might be a good back up plan.  Do you know of any strength tests I can do on it?  It seems decent and it is held up pretty well to the boil test.  Thank you for the help.


boatsmith said:

We see plywood that appears similiarr to this. We refer to it as doorskin. We use it for templates. We frequently find inferior quality plies inside the outer plies are very thin compared to thicker center ply. This is not balanced and is not near as strong as three equal plies.  I would not recommend this plywood for anything that was not disposable.

Any luck finding marine plywood in Oki yet? I'm also looking to build a Hitia 14, but I haven't bought plans yet since it's tough to find the materials here. Make-man only has so much! 

Sorry it took me so long to get back to you.  I ended up sticking with the plywood above.  I found a lumber yard that sells 4'x8' sheets and I was able to see the shipping records in English and it confirmed that the plywood is meranti which is Mahogany.  After a lot of research and my boil test I feel pretty good about this wood.  The boat is coming along well, now I'm ready for this Typhoon to pass so I can start working on it again.

Nathan Stanley said:

Any luck finding marine plywood in Oki yet? I'm also looking to build a Hitia 14, but I haven't bought plans yet since it's tough to find the materials here. Make-man only has so much! 

That's great! I'll have to find some.

Reply to Discussion

RSS

© 2024   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service