Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

Building Techniques and Solutions (259)

Discussions Replies Latest Activity

Sanders recommendation needed for Tiki 38

I am going to buy sanders from the Festool brand and I would like some advice on which type of sanders of their range are most suitable for…

Started by Sailing SV Satoshi

5 1 hour ago
Reply by Chuck Valley

Tiki 21 Lashings

When putting together my Tiki 21, I found the lashings time consuming and hard work. During the season some have also slackened slightly le…

Started by Ian Bamsey

17 10 hours ago
Reply by friendshipsloop .

Tiki 26 - Hull allignment issue

Hi, I'm restoring Tiki #355 from a pretty desperate state into a thing of elegance and beauty - hopefully. When I got the boat, I didn't n…

Started by Shoestring

9 Sep 11
Reply by Andrés

rubber to beam blocks - what kind of glue?

Hi folks, My Tiki Itatae building process is nearing (hopefully happy) ending and now the question is what kind of glue/adhesive would be…

Started by agur paesüld

12 Sep 9
Reply by Omar M. Rashash

Ultra lightweight deck+nonskid, DIY...

Hi all, finally decking and getting ready for sea trials.....Cant wait! So, the final assembly of his new lightweight deck......And NON SKI…

Started by rael dobkins

0 Sep 8

Simple hatches and strong akas....

  Hi all, final details before see trials.... Proa WHY NOT? https://youtu.be/3osZ2fm18U8 All d best Rael

Started by rael dobkins

0 Aug 28

Proa WHY NOT? sailing!!!

  Here he is guys. Finally showing off..... A good day flying away...... https://youtu.be/3osZ2fm18U8 All d best. BSY.

Started by rael dobkins

0 Aug 20

Tiki 38, Bruynzeel Hechthout, 9mm not a standard size

Hello everybody, This is my first post, I'm sure there will be many more from me. In the Tiki 38 material list is 9mm plywood, which is no…

Started by Sailing SV Satoshi

5 Aug 15
Reply by Sailing SV Satoshi

Proa WHY NOT? finally assembled!

   Hi all, well, getting close.... almost wet, time to rig. here he is: https://youtu.be/TzPBophSA1Y all d best. BSY.

Started by rael dobkins

0 Jul 31

Crossbeams assembly and hull line up.

Bonjour, Back and center crossbeams have to be in contact with the cabin bulkheads, or is it necessary or possible to leave a gap? Thanks a…

Started by Éric Bouvéron

5 Jul 14
Reply by Brad Ingram

RSS

© 2017   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service