A Photo & Discussion Forum for Wharram Design Enthusiasts
Anybody with some ideas trying to move my 28 foot Wharram three blocks to the boat ramp, thank you from Texas
Looks good thanks
You didn't say if your boat was assembled or not or if the three blocks were hilly or flat. I would get a permit to move it early in the morning (if in a built up area) and a) if it were one hull at a time I'd use a simple plywood cradle with wheelbarrow wheels and a few helpers and push it. If b) fully assembled it would need a more substantial cradle I suspect and more of a crude trailer design with vehicle support.
The builder if my tiki 26 moved one hull at a time 1km to a beach, on his own using the simple cradle method above.
I'm sure you will figure something out
Thanks for your help, I got her to fly for the 3 blocks to the bay!
Woohoo! That's way better than pushing.
Glad it's worked out for you
© 2023 Created by Budget Boater. Powered by