Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

James Ryan davenport's Discussions (14)

Discussions Replied To (11) Replies Latest Activity

"http://www.libertypultrusions.com/pultrusion-products/fiberglass-beams/ Here is a l…"

James Ryan davenport replied Aug 15, 2016 to FRP cross beams

4 Aug 15, 2016
Reply by Jeremy Walker

"Yes. Bilges and any place that is not easily accessible where water could collect. I…"

James Ryan davenport replied Aug 10, 2015 to Glassing fillets to bulkheads

7 Aug 10, 2015
Reply by James Ryan davenport

"On my tiki 30 I am glass ing a lot of the inside with a very light 4oz finish cloth.…"

James Ryan davenport replied Aug 8, 2015 to Glassing fillets to bulkheads

7 Aug 10, 2015
Reply by James Ryan davenport

"I have had good success with maranti marine grade ply. Make sure it is stamped 1088"

James Ryan davenport replied May 11, 2015 to What kind of plywood?

13 Jun 18, 2015
Reply by Patrick John McGrath

"I am building a tiki 30 and really want to use aluminum beams also. Any information…"

James Ryan davenport replied Apr 21, 2015 to Tiki 26 aluminium beams

14 Nov 24, 2020
Reply by maxim jurgens

"Thanks, Your insight is always helpful!"

James Ryan davenport replied Dec 16, 2014 to 25hp on tiki 30?

5 Jan 1, 2015
Reply by Rogerio Martin

"Thanks for the advice!"

James Ryan davenport replied Dec 12, 2014 to Bulkhead 3 and 6

11 Dec 12, 2014
Reply by James Ryan davenport

"I guess the two sheet method in the plans is for minimizing plywood waste by using t…"

James Ryan davenport replied Dec 12, 2014 to Bulkhead 3 and 6

11 Dec 12, 2014
Reply by James Ryan davenport

"Thanks,  I see the but blocks for the sides panels but not for the bulkheads."

James Ryan davenport replied Dec 10, 2014 to Bulkhead 3 and 6

11 Dec 12, 2014
Reply by James Ryan davenport

"On Tiki 30"

James Ryan davenport replied Dec 9, 2014 to Bulkhead 3 and 6

11 Dec 12, 2014
Reply by James Ryan davenport

RSS

© 2021   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service