Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

My Pod is almost complete but I'm getting concerned that the decking is not going to be stiff enough without some kind of forward aft  framing-I hope I'm just being needlessly alarmed- After all things worked out up till now-

Views: 561

Reply to This

Replies to This Discussion

Hey John,i was fitting my motor to my tiki 26 yesterday and the cockpit deck flexes too,if that is any kind of consolation.



paul anderson said:

Hey John,i was fitting my motor to my tiki 26 yesterday and the cockpit deck flexes too,if that is any kind of consolation.

No consolation to me Paul "hey you to Tahitian girls stop you're dancing get down from there that coach roof will not support the two of you" who the heck wants that- squishy decks that you have to pussyfoot all over

paul anderson said:

Hey John,i was fitting my motor to my tiki 26 yesterday and the cockpit deck flexes too,if that is any kind of consolation.

Not sure of the ply thickness on tiki 30? I built a boat out of 9mm and had this problem on the floor of the deck, even with 3 longitudinal fames ruining the length (6 ft). I solved it by adding heavier frames (30mm x60mm hardwood, 3pcs, 30mm touching the bottom) screwed to the bottom with big screws entering the wood at diff angles.
Cheers
Pat

Reply to Discussion

RSS

© 2024   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service