"I also ended up ordering another type from a German brand. They don't have the connector on the backside, but the price / value seems much better: https://www.offgridtec.com/en/offgridtec-etfe-spr-f-100-v2-120w-flexible-solar-module.html"
A Photo & Discussion Forum for Wharram Design Enthusiasts
-
Éric Bouvéron
- Male
- Hong Kong
- Blog Posts (5)
- Discussions (226)
- Events
- Groups (1)
- Photos (18)
- Photo Albums (2)
- Videos
Éric Bouvéron's Discussions
Flying jib
1 Reply
Bonjour, Now that I have a pole and a gennaker, I am thinking of a flying jib. (we call it "clinfoc", in French).I have seen UK Sailmaker's video of a boat using one:…Continue
Started this discussion. Last reply by Brett Parker May 11, 2021.
Nice swim. Now back on board.
1 Reply
Hi,Being tied on a buoy in tropical waters, BDO needs a bottom cleaning once a week or every ten days.Quick job. No worries. Then, time to go back on the little cat. And if it’s possible, it’s not…Continue
Started this discussion. Last reply by Andrés May 25, 2020.
Enjoy the boat, enjoy the food, but my sailing skills...
14 Replies
Hi, That was a nice day, with light wind.Some problems made us start late, and we ended to a small island, not as far as we wanted to go first, where we had an unhealthy lunch. However, I think I do…Continue
Started this discussion. Last reply by Ian Bamsey Jun 1, 2020.
Tiki 21. How big is your asymmetric spinaker
8 Replies
Bonjour,I wish to put an asymmetric spinnaker on my Tiki 21. Bowsprit it ready, thanks to Gratitude, and I have asked sail makers but... I think that they are very optimistic in the sizes they…Continue
Started this discussion. Last reply by Éric Bouvéron Apr 2, 2020.
Gifts Received
Éric Bouvéron has not received any gifts yet
Éric Bouvéron's Page
Latest Activity
"I went with a German brand, it works but I forgot the name. Will be on the boat Thursday and will have a look"
"So after researching this a bit myself I think I'll go for these ones: https://www.sunbeamsystem.com/maxa-etfe-solar-panel/
They have the cable on the backside and are walkable/anti-slip, meaning they should do quite well on the deck."
"Could you share which model you went with and how the experience has been? Thanks!"
"How long does dynema standing rig last? What is the price comparison?"
Bouton d'Or tries it's assy.
"That's superb! I have a similar setup with an asymmetric. What apparent wind does this work with?"
"Normally for a sail like this you might have a wire in the luff of the sail. But if of heavier construction you don't really need this. I gather you will be using this either reaching or on a broad reach. This is fine as the loads on the sail…"
Flying jib
Bonjour, Now that I have a pole and a gennaker, I am thinking of a flying jib. (we call it "clinfoc", in French).I have seen UK Sailmaker's video of a boat using one:https://afloat.ie/resources/marine-industry-news/uk-sailmakers-ireland/item/45822-flying-jibs-v-code-zeros-on-irc-ratingIt seems quite efficient upwind, according to the info provided.Here are my…See More
"Bonjour,
D'abord, les Fançais ne sont pas si mauvais que ça en langues étrangères, mais pour rester dans le débat, je pense que partir à quatre sur un Tiki21 ne serait pas très raisonnable,…"
"Éric
Other things which have help me point :
1. A downhaul on the main to get the wrinkles out
2. Pull really hard on the gaff halyard (See little Cat, Roger uses a 2:1 on the gaff)
3. Use a barber haul or tweeker to pull the head sail…"
"Hi again,
I finally used Ian Bansey's design for my forestay, with some differences.
I didn't put a bottle screw on the forestay, only a lashing.
I add a string going thru the jib hook. It's not as smooth as a block, but with…"
"I have the same problem with my T26. I installed a very simple ladder, and I am happy with the solution.
I think you can do the same. See the attached pictures."
Nice swim. No back on board.
Hi,Being tied on a buoy in tropical waters, BDO needs a bottom cleaning once a week or every ten days.Quick job. No worries. Then, time to go back on the little cat. And if it’s possible, it’s not easy, at least for me. 90 kg, 62 years old, not the strong type. I can imagine myself, with more clothes than a swimsuit, falling down and trying to come back on board. I don’t like the picture and I sail alone 90% of the time, hélas.So the question to you, Tiki21 owners. What’s your plan? A rope with…See More
Profile Information
- I am:
- A home builder, I want a Wharram
- What boat (s) are you building or do you own?
- J24. sold now.
Bought plans for a Tiki21
Hope to start this summer.
- Country, City, and State?
- Hong Kong
- Looking to?
- Tiki 21, to build here in Hong Kong, or most likely China.
- Website:
- http://tikimic.blogspot.hk
Éric Bouvéron's Photos
Éric Bouvéron's Blog
Tiki 21 topsail
Hi,
An assymetric orcsymetric spinaker is nice on a small Tiki, but did some of you try a topsail? According to the gaff rig, it may be possible. Any idea around?
Cheers,
Éric
Posted on November 1, 2019 at 3:58am — 2 Comments
Tiki 21. Parts layout on the 15mm plywood sheet.
Bonjour,
I started to loft yesterday, making templates for the 15mm sheet of the Tiki21.
I take careful mesurements, then tried to put everything on the 1200 x 2400 plywood sheet. Impossible. I cannot put everything. I finished with no space for one rudder.
Mesured again, and agin. Same results, can't find any mistake on my side.
So, question is: did some of you faced the same problem? I will if necessary find a piece of plywood for the remaining part, but I'd like to know… Continue
I started to loft yesterday, making templates for the 15mm sheet of the Tiki21.
I take careful mesurements, then tried to put everything on the 1200 x 2400 plywood sheet. Impossible. I cannot put everything. I finished with no space for one rudder.
Mesured again, and agin. Same results, can't find any mistake on my side.
So, question is: did some of you faced the same problem? I will if necessary find a piece of plywood for the remaining part, but I'd like to know… Continue
Posted on July 25, 2015 at 6:16am
Before I order West System, ask help for clarification
Bonjour,
I am now on the way to order the resin, and found West System in Shenzhen,China.
I am on for a Tiki 21, and, if some have experience in the building of this model
1-Are quantities indicated in instructions correct (no need to have more of a articular item?)
2-It is asked for : 406A 0.275 kg Colloidal Silica and 409B 4.5kg Microspheres (for fillets) OR
407B 3.5kg Low Density Filler (for fillets).
Is the reference 407B replaces bothe 406A… Continue
I am now on the way to order the resin, and found West System in Shenzhen,China.
I am on for a Tiki 21, and, if some have experience in the building of this model
1-Are quantities indicated in instructions correct (no need to have more of a articular item?)
2-It is asked for : 406A 0.275 kg Colloidal Silica and 409B 4.5kg Microspheres (for fillets) OR
407B 3.5kg Low Density Filler (for fillets).
Is the reference 407B replaces bothe 406A… Continue
Posted on July 15, 2015 at 3:19am — 1 Comment
About the Wood Triangular Section
Bonjour,
All wood has been sourced now, but the "Triangular Section". Not able (capable?) to find it standard, (here in China, Shenzhen area )and since it is not in the form of a "square triangle", (BC² = AC² + AB²) I hesitate on what to order to mill it myself with my hand circular saw mounted on a table.
I am on a project for a Tiki 21, and the base of the wanted triangular section is 32mm, while the sides are 25mm. Or, "Imperialy speaking" base 1 1/4" and sides 1". (I just…
ContinuePosted on July 7, 2015 at 2:57am
Comment Wall (3 comments)
- At 11:32am on April 29, 2015,
sailorjoy said…
thank you for the reference
- At 7:23pm on July 16, 2015,
Blanc Jean-Paul said…
- Thanks a lot
J'ai commencé mon petit catamaran sans avoir d'expérience de la résine. Et j'ai eu quelques hésitations et la peur de rater. Mais au final aucun problème sérieux. Donc, vas y fonce.
- At 8:33am on April 27, 2018,
john james said…
Hey Eric thank you so much for the tip on window installation that was really helpful both systems are so sanitary it was a bit shaming comparing my technique to how they performed the job. I wish I'd been watching these two websites earlier I would've ended up with a much nicer building experience
© 2024 Created by Budget Boater.
Powered by
