A Photo & Discussion Forum for Wharram Design Enthusiasts
Hi all - I am modifying my trailer (lowering the bed) so I can winch my tiki up a ramp with rollers when the hulls are lashed together - anyone know approximately the width of keels when hulls are lashed together.
my guess is it will be 4' (as hulls are 4')
anyone done any winching up a trailer ramp
That should be about right. I allow a gap of about an inch between the gunwales on mine so you don't get any chafe, and use lengths of 4 x 2 lashed on as temporary beams.
thank you - i forgot i put motorbike tyres between hulls so need to allow for them!