Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

Looking through my plans and can’t find how the cockpit floor gets attached to the beams. I see that a chock goes above the mounting brace to keep it from pushing up but is there anything that keeps it more stable? Lashings, bolts, chocks, etc.

Views: 196

Reply to This

Replies to This Discussion

Matthew, I can't speak specifically to the T26 but the T38 pod just sits on the beams and is only held in place against lifting by wave action by wood blocks fixed once the pod is in place. So unlikely there's anything more sophisticated on the T26...I suspect you've read the plans right. 

Reply to Discussion

RSS

© 2024   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service