Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

Omar M. Rashash's Discussions (90)

Discussions Replied To (78) Replies Latest Activity

"Well, while Dyneema has some quirks I need to deal with, if I use Dyneema, I can car…"

Omar M. Rashash replied Jan 23, 2016 to Wire or Dyneema for Standing Rigging?

10 Mar 9, 2016
Reply by Barefoot Boat Bums

"Sawdust is all but worthless as an epoxy filler in boat building. It adds nothing to…"

Omar M. Rashash replied Aug 23, 2015 to Glueing the parts

9 Aug 28, 2015
Reply by paul anderson

"If the fillet is properly sized, and composed of the correct filler materials, it's…"

Omar M. Rashash replied Aug 3, 2015 to Glassing fillets to bulkheads

7 Aug 10, 2015
Reply by James Ryan davenport

"Well, that's a bit harsh, don't you think? The fact is, the "inferior" wood the mat…"

Omar M. Rashash replied Jul 13, 2015 to Why nails with epoxy?

40 Jul 13, 2015
Reply by Rogerio Martin

"IIRC, I was taught in High School chemistry that one must read the meniscus (concav…"

Omar M. Rashash replied Jul 4, 2015 to Waterline: Mark it when lofting

7 Jul 5, 2015
Reply by boatsmith

"LOL, the ancient art of the water level. It's cheap, it works, and it is at least, i…"

Omar M. Rashash replied Jul 4, 2015 to Waterline: Mark it when lofting

7 Jul 5, 2015
Reply by boatsmith

"When the hulls sides are on the boat, they are curved, and the waterline appears as…"

Omar M. Rashash replied Jul 3, 2015 to Waterline: Mark it when lofting

7 Jul 5, 2015
Reply by boatsmith

"BTW, that's 4 hull sides being cut at once for a Hitia 17, a total of about 16mm."

Omar M. Rashash replied Jul 3, 2015 to Pitfalls and Learnings

14 Jul 3, 2015
Reply by Allen Bosely

"The easiest way to gang sheets for cutting is to use screws and washers, nails or st…"

Omar M. Rashash replied Jul 3, 2015 to Pitfalls and Learnings

14 Jul 3, 2015
Reply by Allen Bosely

"Building sequence/Shop process The typical wood boat is built by making the hull and…"

Omar M. Rashash replied Jun 30, 2015 to Pitfalls and Learnings

14 Jul 3, 2015
Reply by Allen Bosely

RSS

© 2021   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service