Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

Kris's Discussions (51)

Discussions Replied To (33) Replies Latest Activity

"So I checked again in the original building plans, and apparently the original Pahi…"

Kris replied Oct 2, 2024 to supplementary beams: which material?

7 Oct 24, 2024
Reply by Monika Matis

"This is also what I gathered from further web-searches. What about epoxy-glueing so…"

Kris replied Oct 2, 2024 to supplementary beams: which material?

7 Oct 24, 2024
Reply by Monika Matis

"This design pressure is a bit mysterious. According to this website, a design pressu…"

Kris replied Sep 23, 2024 to Side hull window thickness?

7 Sep 23, 2024
Reply by Kris

"I crunched the numbers for hypothetical 200mm x 400mm windows which is pretty close…"

Kris replied Sep 23, 2024 to Side hull window thickness?

7 Sep 23, 2024
Reply by Kris

"Ah, found a rather complicated formula to calculate it here: https://www.cruisersfor…"

Kris replied Sep 23, 2024 to Side hull window thickness?

7 Sep 23, 2024
Reply by Kris

"I assume it largely boils down to thickness versus total size or rather maximum unsu…"

Kris replied Sep 23, 2024 to Side hull window thickness?

7 Sep 23, 2024
Reply by Kris

"I also ended up ordering another type from a German brand. They don't have the conne…"

Kris replied Sep 23, 2024 to Solar panel with socket on the back

6 Sep 23, 2024
Reply by Kris

"Yes, that I know already, but which thickness is good?"

Kris replied Sep 17, 2024 to Side hull window thickness?

7 Sep 23, 2024
Reply by Kris

"So after researching this a bit myself I think I'll go for these ones: https://www.s…"

Kris replied Sep 16, 2024 to Solar panel with socket on the back

6 Sep 23, 2024
Reply by Kris

"This video shows how rough fillets come out with silica and chopped glass fiber, but…"

Kris replied Sep 13, 2024 to Epoxy filler for fillets and bonds, only micro glass beads or also chopped glass fiber?

13 Oct 19, 2024
Reply by Kris

RSS

© 2026   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service