Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

Construction and laminating of new main hatches for Godzilla. Very complicated (for me!) with curve of deck to take into account, and then metal hatches needing to be fitted to flat surface. Two layers of cloth for layup.

Rating:
  • Currently 0/5 stars.

Views: 177

Comment by kim whitmyre on May 28, 2014 at 3:00pm
They look good... Did you test them with the blast of a hose?! ;-)
Comment by Andy Best-Dunkley on May 29, 2014 at 3:58am

Haven't yet, but maybe should! They are a lot stronger than the old ones, and hopefully won't snag the genoa sheets as badly.

Comment by kim whitmyre on May 29, 2014 at 12:41pm
I see the mast is down - the hatches were part of a restorative maintenance?
Comment by Andy Best-Dunkley on May 29, 2014 at 1:31pm

well yes and no - we have to take the mast down every year when we lift her out for the winter. There is virtually no tide here (in Finland, Baltic Sea) so we lift out with a truck. Each year I take on some project to fix/improve/repair! I am somewhat limited for time as winter is very harsh and I don't have a tent or indoor space to store her, so there is a small window each spring when I can actually work on the boat outside and it is warm enough for epoxy or painting! Of course the hatches I made in my workshop at home, but there was still some work to be done cutting off the old hatches and fixing the cabin tops.

Comment

You need to be a member of Wharram Builders and Friends to add comments!

Join Wharram Builders and Friends

© 2024   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service