I sure that there will be no need to shorten the rudder arms. The Vane get a small outrigger ( 15mm ply ) which will be mounted at the back of the cabin. So the wind vane will be higher the cabin and outside the Hull. It will be a flexible construction, just mounted in need. ( straight course longer than 45 minutes ) When I go over the Hull I will also change the the vane to opposite. When the arms get in collision with the braked and the butterfly nut, I need to shorten them for a few mm.
Thats the plan right now, one of many " up to now plans "
First I decided to build a additional beam on the back, and remote the van with two canvas. Now I will fix my Back Nettings in the same eyestrap which I made for the mainsheet traveler.
That was my first message to you. I haven't sailed my Tiki 21 for 5 years. I am working on getting her back in the water and a deck tent and new trailer are on my list. I live in Manitoba, Canada and we are still in full on winter here so I have some time before sailing season. I spotted your two ads on this site so I thought I would just check and see if they were available. How much are you asking for the two items?
From your page it looks like you have done some serious sailing in your Tiki. I have sailed on my brothers Ranger 23 from the Queen Charlotte Islands to Vancouver Island, but that is the limit of my ocean sailing.
Hey Roger, Michael from Seattle here. I just wanted to say thanks for the awesome blog - it's amazingly helpful as I re-rig my T21. I've been puzzling over the jib sheeting angles, and your post covered it nicely. Then I was wondering "how do I make those cool soft pad eyes?", and found that post too. Thanks for all the sharing, it's much appreciated!
hi Roger. This will be my second summer in my Tiki 21, up here in the Vancouver, BC area. I've added a bowsprit for my small spinnaker a used gen that I got, but my question for you is about your mainsheet setup on Little Cat (love your blog and the way you've maintained and tweaked your Tiki) Last year I tried the rope traveller between the two sterns, but it didn't 'travel' very well. I see the pictures on your site, but can you tell me a bit more about it? Is there a rope that the mainsheet pulley moves along, or is it just attached to the ropes that pull it towards each hull? Also, why is the rope wrapped around the tillers? Appreciate your time. Steve