Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts


Me and a friend are building two Tiki 30 and are about to order aluminium masts.
We've found a mill here in the UK who can make them in one piece of aluminium(6082).
Length 9 meters, diameter 140mm, thickness 4mm.
Downside is we have to buy 12 of them so we where hope to find other builders/owners who wants aluminium masts too.
Price is approx £250/each if we can find buyers for all, if not maybe we could split the cost.
We will need 2 masts ourselves.

We are planning for delivery spring 2020.

If there is any interest please get in touch.

Best regards
Krister and Phil

Views: 848

Reply to This

Replies to This Discussion

I would like to replace my wooden mast on Moku. Is the order still going ahead or have I missed it? Dave

Hi Dave

I'm not sure. Happy to try with you to purchase 2 masts (or any more if others are interested) but I need to call suppliers as they all seem limited to 6m which cannot be the case as these tubes must be extruded in a continuous length. KR Andrew

Am I too late to join this?

Just came across this in my local Craigslist. Not sure where they are located as it looks like a nationwide ad from a surplus place but these are pretty cheap and for anyone in the USA who's looking for a mast or for front/rear beams for a bigger Tiki, these might do the job. Thicker than Wharram calls for but probably still lighter than a wood mast.


Reply to Discussion


© 2021   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service