A Photo & Discussion Forum for Wharram Design Enthusiasts
Hi everybody, I am interested in building the smallest one were I can seat upright.
I´ve read the 21 doesn´t have enough room to do that, but I wonder how much more do I need, maybe I could rise the cabin tops.
If some one could post the dimensions from bunk level to the underside of the cabins, I´ll be thankfull.
I like this idea removable hard cabin toppers... maybe even ones that can come apart and be stored on board... I've been thinking of something like this for my T21... definitely cheaper and faster than building a T26... However I would still rather a T26... More room and more storage = more comfort and longer trips
What is the smallest I can sit up in is a very good design question. I sometimes ask what is the smallest I can stand up in. Unfortunately both questions show up a design limitation in deep "vee"design. My pahi31 is approx.1800 [5ft 10in]high but 400 [16in] of this is "lost"under the floorboards - so only 1350 [4ft6in] headroom. The smaller the boat the less you can afford this loss - in a large boat it may make very little difference. You can increase headroom by higher cabins etc. but less obviously perhaps by using a hull which is wider. Shallow "vee" [hard chine] or a dory will allow you to lower the floor thus getting the extra room you need. A dory [flat bottom panel ] of 20cm [8"] will add 20cm to headroom. Of course you are now well on the way to designing or buying plans for a different boat.
Please do not hear this as a blanket criticism of deep "vee" boats whether designed by JWD or not. Tiki 21 is an award-winning boat and deservedly so. Ther are many reasons for our choice of design and "I just want a Wharram" is as valid as any. However "the smallest I can stand up in " and "the smallest I can sit up in" are probably not deep "vee"hulls.
This is the story of Badu, a tiki 21 liveabord!!!!
Go to picture gallery, click on Badu.
Thanks Mawibo... I might not have been clear in my last post... Thanks for re-posting the link
This picture of my buddy Rich gives a good idea of the size of the Tiki 21 accommodations.
Thanks for the picture.
In line of what LastParadise wrote, I really like the one sheet high sidepanels.
I thought about scaling up an 10% from the original T21 dimensions, would be very easy to do, and then adding a little height in the cabin tops. That could give me 90 cm and not look too odd. Wonder if it would be too much trouble.
One thing I´d like to keep is the original mast height, that can be done with just one alu tube, without welding.
Wow, the picture really does portray how small the 21 really is. Circumnavigation anyone?
Seriously though, I think the slightly scaled up boat would be great. I think, 1AND 1/8 is what looked like would use all of 3 8' sheets buttjointed. Whatever is easy math wise. 10% easier in metric. Plans seem to be in metric and imperial. Let us know how you make out. Won't be doing a small Tiki for many years, but you never know!
© 2023 Created by Budget Boater. Powered by