Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

Björn's Discussions (98)

Discussions Replied To (85) Replies Latest Activity

"Windpilot and Raymarine (in this order), the latter one quite easy to mount as well"

Björn replied on Monday to Wheel autopilot for tiki 38

4 on Monday
Reply by Björn

"Have a look at the pictures in my profile and you find pretty much everything for th…"

Björn replied Oct 9 to Deckpod Modification Tiki 38

16 Oct 12
Reply by Budget Boater

"This book is the bible!"

Björn replied Oct 8 to Is it recommended to coat whole sheets of plywood with epoxy before any cutting?

12 Oct 23
Reply by Stewart Coates

"Lowering the floor is a good idea (mine is 100 mm lower), then you do not sit with y…"

Björn replied Oct 5 to Deckpod Modification Tiki 38

16 Oct 12
Reply by Budget Boater

"Good idea, Rotex and Mouse, get the vacuum system as well, but not the smallest (I s…"

Björn replied Sep 20 to Sanders recommendation needed for Tiki 38

5 Sep 20
Reply by Chuck Valley

"no problem at all, I always do it this way, I put loops around the  end of the beam…"

Björn replied Sep 7 to Lifting a tiki38

2 Sep 7
Reply by Jacques

"Use epoxy: clean the rubber with acetone, then use 80 grit  sandpaper the surface to…"

Björn replied Aug 30 to rubber to beam blocks - what kind of glue?

12 Sep 9
Reply by Omar M. Rashash

"From what I have heard Hechthout is of the best plywood materials around and offers…"

Björn replied Aug 6 to Tiki 38, Bruynzeel Hechthout, 9mm not a standard size

5 Aug 15
Reply by Building SV Satoshi

"The sinks on my T38 drain right in the water as well, even with quite some weather,…"

Björn replied Aug 1 to Sink drains

3 Aug 2
Reply by Axel

"Not with your professional experience."

Björn replied Jul 17 to Tiki 46 build

9 Sep 24
Reply by dennis schneider


© 2017   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service