Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

kim whitmyre's Discussions (378)

Discussions Replied To (314) Replies Latest Activity

"Excuse me! You meant the distance between the fore beam and the aft beam, I realize,…"

kim whitmyre replied Oct 12, 2015 to Tiki 26 hull centerline width

4 Oct 19, 2015
Reply by Bill & Houston Barker

"Greetings Bill, Hope this finds Houston, Betsy, and yourself in good trim! What's go…"

kim whitmyre replied Oct 12, 2015 to Tiki 26 hull centerline width

4 Oct 19, 2015
Reply by Bill & Houston Barker

"Are you familiar with how the wooden boat builders join planks for rudders? Long hol…"

kim whitmyre replied Oct 11, 2015 to rudder size

7 Oct 11, 2015
Reply by john james

"As I recall, Wharram narrowed the beam to hull length on the Pahi 52, and the tama m…"

kim whitmyre replied Oct 9, 2015 to What configuration for maximum speed performance?

25 Oct 10, 2015
Reply by Blanc Jean-Paul

"Xlnt, Hans! Thanks for sharing your travels with us."

kim whitmyre replied Oct 9, 2015 to WAKATAITEA IS SOLD

1 Oct 9, 2015
Reply by kim whitmyre

"A judicial weight (meaning the 55 'lb weight of the motor)will likely ease the "hobb…"

kim whitmyre replied Oct 4, 2015 to Engine position for Tiki 26

18 Oct 4, 2015
Reply by patrick lennon

"A judicial weight will likely ease the "hobby horsing." A 4-stroke motor will be ser…"

kim whitmyre replied Oct 4, 2015 to Engine position for Tiki 26

18 Oct 4, 2015
Reply by patrick lennon

"Patrick, it's the Nissan (rebadged Tohatsu) 4-cycle 6hp SailPro model. The SailPro c…"

kim whitmyre replied Sep 30, 2015 to Engine position for Tiki 26

18 Oct 4, 2015
Reply by patrick lennon

""

kim whitmyre replied Sep 29, 2015 to Engine position for Tiki 26

18 Oct 4, 2015
Reply by patrick lennon

"Patrick, I went from a long-shaft 20" motor to the extra long-shaft 25" motor and ca…"

kim whitmyre replied Sep 29, 2015 to Engine position for Tiki 26

18 Oct 4, 2015
Reply by patrick lennon

RSS

© 2024   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service