Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

alex's Discussions (93)

Discussions Replied To (74) Replies Latest Activity

"thank you jacques where i can see photos from tinto? i was looking some in this webp…"

alex replied Sep 29, 2013 to Pod/cockpit tiki 38

17 Oct 15, 2013
Reply by alex

"hahaha Chuck, almost i have seen pretty nice pods like on Touch wood, lipa lipa, na…"

alex replied Sep 28, 2013 to Pod/cockpit tiki 38

17 Oct 15, 2013
Reply by alex

"when using a winch , i use the gaff halyard so the lashing goes as vertical as i can…"

alex replied Aug 8, 2013 to Standing rigging lashings - how tight? - & how?!

18 Aug 8, 2013
Reply by alex

"hello Don I've been trying that way too, but the problem is that the mast (in my cas…"

alex replied Aug 3, 2013 to Standing rigging lashings - how tight? - & how?!

18 Aug 8, 2013
Reply by alex

"Yes Careenage should be a normal practice among us wharramists, and i have been maki…"

alex replied Aug 2, 2013 to bottom painting without haul out in marina

13 Aug 20, 2013
Reply by Roger

"hi Ann and New I was about to do the same as you, but the required drying time shou…"

alex replied Aug 1, 2013 to bottom painting without haul out in marina

13 Aug 20, 2013
Reply by Roger

"hi andy good topic.. I used to have the lashings very tight, even used the main (an…"

alex replied Aug 1, 2013 to Standing rigging lashings - how tight? - & how?!

18 Aug 8, 2013
Reply by alex

"Congrats , very nice experience!!! Hope to see you in South America some time in fut…"

alex replied Jul 18, 2013 to fast trip crossing.. singapore - rodrigues island 3200nm to go

11 Jul 30, 2013
Reply by Bertrand FERCOT

"OK thank you!!!! enjoy the Spanish summer..."

alex replied Jul 12, 2013 to RE POWERING THE BOAT

29 Jul 12, 2013
Reply by alex

"I covered the lashings with 3M 4200 and then many layers of ablative antifouling , o…"

alex replied Jun 29, 2013 to Fouling on rudder lashings

7 Jul 1, 2013
Reply by Raf

RSS

© 2024   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service