Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

Ron Hall's Discussions (31)

Search Forum

View

Discussions Replied To (30) Replies Latest Activity

"Richard, The boats are all set up a little differently, but Robert has all the right…"

Ron Hall replied May 15, 2013 to Tiki rig mainsheet arrangement query

 9 Nov 28, 2014
Reply by Matthias von Mutius

"I use 9.9s, haven't had any problems with the wells. Think they are plenty strong, a…"

Ron Hall replied Feb 20, 2013 to Tiki 38 engine wells

 6 Feb 20, 2013
Reply by Ron Hall

"Don, My experience on my 38 is about the same. The boat has been sailed pretty hard…"

Ron Hall replied Feb 3, 2013 to Rudder lashings instead of pintles and gudgeons

 6 Feb 9, 2013
Reply by Don Brazier

"Alf, One other thing. I would still put two spinnaker halyards through the masthead…"

Ron Hall replied Jan 31, 2013 to Tiki 38 external jib halyard

 9 Feb 12, 2013
Reply by Alf Bangert

"Alf, The halyard blocks for the jib and spinnaker go through the masthead groove in…"

Ron Hall replied Jan 31, 2013 to Tiki 38 external jib halyard

 9 Feb 12, 2013
Reply by Alf Bangert

"Another thing to remember in getting them tight is to protect the beams. I talked to…"

Ron Hall replied Apr 24, 2012 to Tightening fraps w mole grips

 10 May 2, 2012
Reply by Randall S Anselmo

"Vise-grips didn't appear to damage the line. They hold the line without slipping, so…"

Ron Hall replied Apr 23, 2012 to Tightening fraps w mole grips

 10 May 2, 2012
Reply by Randall S Anselmo

"I have a separate steaming light mounted on the foremast, but am not sure it meets C…"

Ron Hall replied Mar 12, 2012 to Navigation Lights on a Tiki 38

 7 Mar 12, 2012
Reply by Ron Hall

"My Tiki 38 has the Aqua Signal Tricolor/anchor/strobe combination mounted on the mai…"

Ron Hall replied Mar 10, 2012 to Navigation Lights on a Tiki 38

 7 Mar 12, 2012
Reply by Ron Hall

"I agree with Boatsmith. If they aren't as tight as you can get them, the mast head w…"

Ron Hall replied Nov 7, 2011 to shroud rope

 4 Nov 7, 2011
Reply by Ron Hall

RSS

© 2024   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service