Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

Robert's Discussions (22)

Discussions Replied To (20) Replies Latest Activity

"Hi Robert, Thanks for publishing this. I am however not a huge fan of carbon fiber…"


9 May 4, 2017
Reply by Jeremy Walker

"Hi Mike, The range of wall thickness which Wharram specifies for Alu masts for a Tik…"

Robert replied Jul 21, 2016 to Tiki 46 Mast.....help.

17 Sep 2, 2016
Reply by Jeremy Walker

"Hi Graham, I have seen a Pahi 42 with 2 15HP fourstroke motors, and it worked well.…"

Robert replied Jan 27, 2016 to Alternative position for outboard motors?

12 Feb 6, 2016
Reply by Graham Anley

"Hi Robin, would the rising wave not lift the boat as well, thereby negating most of…"

Robert replied Sep 14, 2015 to Power management aboard

29 Oct 9, 2015
Reply by boatsmith

"Possibly the problem is that the plans require plywood that is 1220x2440 which is ma…"

Robert replied Jul 26, 2015 to Tiki21 Lofting on the15mm sheet

11 Aug 3, 2015
Reply by Pius Bielowski

"I used bronze nails, and pre-drilled the ply sheets with 2mm holes so the nails can…"

Robert replied Jul 13, 2015 to Why nails with epoxy?

40 Jul 13, 2015
Reply by Rogerio Martin

"Hi Éric, I found this: http://wood28.com/en/index.php They seem to do BS1088 marine…"

Robert replied May 26, 2015 to Plywood, again: Red Cedar face and Poplar core can be Marine grade?

10 May 27, 2015
Reply by Tam Dl

"Hi Éric, the idea is to roughen the surface so that the epoxy gets something to grip…"

Robert replied May 8, 2015 to Sanding before fillet

2 May 8, 2015
Reply by Éric Bouvéron

"Hi Cute, you have about 0.5 degrees of toe out, which is regarded as acceptable toe…"

Robert replied Mar 16, 2015 to Hull alignment and crossbeam position

12 Mar 18, 2015
Reply by john james

"These guys have been making such inflatable tents for a while: X-GLOO Good quality s…"

Robert replied Feb 4, 2015 to Boat Tents

5 Feb 6, 2015
Reply by Ian Bamsey


© 2018   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service