A Photo & Discussion Forum for Wharram Design Enthusiasts
Building Techniques and Solutions (329)
| Discussions | Replies | Latest Activity |
|---|---|---|
Rudder Lashings: epoxy in place or caulk?Just putting my final lashings on the rudders and wanted opinions about using epoxy where the rope passes thru the hull and rudder or caulk… Started by Mike Haromy |
17 |
Jun 1, 2015 Reply by agur |
Plywood, again: Red Cedar face and Poplar core can be Marine grade?Hi, I received today an offer for plywood, as follows: item : Marine plywood size: 1250x2500mm thickness: 6mm 15mm finish: satin finish gl… Started by Éric Bouvéron |
10 |
May 27, 2015 Reply by Tam Dl |
A good film, from Balkan Shipyards...Hi all, here's a vid I shot before I messed up my hand, so I totally forgot about it..... anyway, a good film, with many interesting det… Started by rael dobkins |
2 |
May 22, 2015 Reply by rael dobkins |
Stainless steel or brass?Hi, On the material list, screws and bolts may be made of stainless steel or brass. It seems that there are many kinds of stainless steel,… Started by Éric Bouvéron |
4 |
May 20, 2015 Reply by Éric Bouvéron |
Stainless steel or brass?Hi, On the material list, screws and bolts may be made of stainless steel or brass. It seems that there are many kinds of stainless steel,… Started by Éric Bouvéron |
0 | May 20, 2015 |
Stainless steel or brass?Hi, On the material list, screws and bolts may be made of stainless steel or brass. It seems that there are many kinds of stainless steel,… Started by Éric Bouvéron |
0 | May 20, 2015 |
Building a tiki 26 in grp .Hello, So I am busy building a tiki 26 in grp ( plan # 441) Bad quality epoxy and higth inport cost got me to build a mold and go plastic!… Started by Sergo |
15 |
May 7, 2015 Reply by Sergo |
"Crystal Clear" hardware time....Hi all, in balkan shipyards we keep at it..... finally things are getting clear.... questions have answers....... so, just the lat… Started by rael dobkins |
4 |
May 3, 2015 Reply by rael dobkins |
balkan shipyards, seen d light.....Hi all, still on the move, just a short update, and a good enough reason for falling behind schedule....... anyway, finally rigging, g… Started by rael dobkins |
0 | Apr 22, 2015 |
Pahi 31 ply & lumber list?Would anyone be kind enough to share the basic ply, timber & approx amount of resin needed for the Pahi 31? Would like to do a rough co… Started by Allen Bosely |
5 |
Apr 7, 2015 Reply by Bao Ya |
© 2024 Created by Budget Boater.
Powered by
