Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

Hi I have recently bought Charlies Tiki 38 in NZ and are just wondering if someone can tell me the length of beam that would be needed to go across the bows, to add a prod plus front tramp arrangement , total beam is 6.2 m but the centerline beam may be close to 4m?   Would measure it but am not near the boat at the moment and trying to find out if the alloy beam I have here may fit. Thanks

Views: 468

Reply to This

Replies to This Discussion

I can measure later today but the piece of mast I used was 5m. Incidentally the same length as the piece I used for the rear cross beam.

The correct dimension between hull centerlines is 4600mm.

thanks for that I will check what mast lengths I have here

Reply to Discussion


© 2022   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service