From Bone to Banana; A tale of two hulls

Spraying the hullsides on a Tiki 38. First coat of yellow industrial polyurethane. Base coat is industrial epoxy primer. Probably 1.5 hours spraying, 30 minutes clean up. Topsides are done in the same paint in white. After second coat on hullsides, decks will be rolled with non-skid next. Last thing to paint is the bottom which will be done in 3 coats of a copper powder/epoxy resin mix. The 'video' is a series of photos taken with a timer. Don't know how to slow it down to show a bit more detail....