Wharram Builders and Friends
A Photo & Discussion Forum for Wharram Design Enthusiasts
Wharram Tiki 26 Macleay Island
For sale - Peter Gumtree Ad ID 1238488592
Michael , I contacted Peter vis Gumtree. Here is his reply.
Hi graham-I actually saw his comments a couple of days ago ,looking at wharram builders since I am going to keep the boat apparently.He is pretty observant. I had a 20 m. length of spectra and made up a couple of forestays out to each bow,sewn and seized eyes since I found it was hard to splice.I have back to back pad eye plates instead of u bolts for the bridle anchorage point down the stems,seemed like a good idea at the time, and I brought strops up from the out board eye with normal wharram lashing above stem height. Bigger wharram e.g. tangaroa rigs show optional extra forestays along these lines,but I don't know what they make off the lower ends to.I haven't hung any sails off them yet.Its extra security for the mast mostly,we'll pretend there's no windage. I should name my boat "Agriculture".And yes I did put pvc pipe rollers on the bridle,anchor rode hits it. I don't always use an anchoring 2 point bridle. It's anchoring behaviour is not wonderful in the tidal channel on the western side of macleay island where I live.As you can see from the photo I have a good protected spot it can dry out in safety,tied off at all corners.Anchor roller is a work in progress still maybe,but seems to work ok.I bought 2 sheets of 19 mm pressure treated acq ply for the stems beam flanges and rudders and all the scraps went for lashing blocks,anchor roller cheeks, etc.The roller is a trailer roller.The acq ply is only structural grade but it will outlast any fancy marine ply being individually veneer treated prior to glue up. Available in 12mm and thicker in Brisbane.I used to build flat bottom workboats using it.Good stuff.
Join Wharram Builders and Friends
Welcome toWharram Builders and Friends
Sign Upor Sign In
Or sign in with:
© 2022 Created by Budget Boater.
Report an Issue |
Terms of Service
Please check your browser settings or contact your system administrator.