"Awesome, thanks."
Wharram Builders and Friends
"I just looked at mine. 540 should be for the rear and 590 for the center (in addition to the 1850). "
"Ahoy,
In 2018 I built D4 dinghy out of cheap Chinese plywood. I liked how it rowed but it self destructed after about 2 years. I had a bad hip and was out of…"
Making “Disciple” Hull 1 Topside
I take a spiritual journey in the process of building and sailing a vessel based on a very ancient design…
Tiki 30 aft beam length
Hello, I have a quick question about the length of the aft crossbeam.Should the aft crossbeam be built the exact same as the center crossbeam? Or should it be 100 mm shorter?On page 16 of the…See More
B4 the launch, details and why Proas aren't for everyone...
Hi all, the full boat, at port. Launching soon...Keep Shunting, Balkan Shipyards …See More
Classic Wharram Group
This is a group for all the owners of Classic Wharrams out there. These older designs are a bit different than the newer stitch and glue designs. They have different advantages and different…See More
