Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

 Hello, 

I would love some ideas on where you would put the manual windlass in this photo.

And a design that would be low impact to the mast case. The previous owners built this and didn't have a great plan from what I can tell. Would love to see yalls ideas and iterations. 

Views: 276

Attachments:

Reply to This

Replies to This Discussion

That looks very much like the foremast case on a tiki 38. If so, the pad at the after end of the case is designed for a regular winch for the anchor rode. There should be a roller on one side of the cleat to hold the line clear of the case. I guess you could mount a windlass on that plate. FWIW the plans were revised on the T38 to add another layer of ply under the pad for reinforcement. 

looks like a nicely built boat!

Thanks for the reply Axel. It was a build we picked up and was like this. I have since modified the setup and all is good! 

Reply to Discussion

RSS

© 2024   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service