Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

kim whitmyre's Discussions (378)

Discussions Replied To (314) Replies Latest Activity

"If you can use a saw to cut off parts of it , you can then finish it with a good chi…"

kim whitmyre replied Dec 7, 2010 to help...rust

16 Dec 15, 2010
Reply by adriano meis

"The weight of the cockpit bearing on the aft beam ( a tightly lashed beam!) is helpf…"

kim whitmyre replied Dec 2, 2010 to help...rust

16 Dec 15, 2010
Reply by adriano meis

"Consider the Rolly Tasker Loft in Thailand. . .They know how to build Wharram sails,…"

kim whitmyre replied Nov 30, 2010 to Jeckells Sails and other info on TIKI 38

16 Aug 16, 2011
Reply by Georges Moutoussamy

"Adriano, A good epoxy bond is very strong in itself; the bolts are basically insura…"

kim whitmyre replied Nov 30, 2010 to help...rust

16 Dec 15, 2010
Reply by adriano meis

"Are the bolt heads solid or coming apart? If they are solid, with surface rust, imho…"

kim whitmyre replied Nov 29, 2010 to help...rust

16 Dec 15, 2010
Reply by adriano meis

"Those look great, David. I need to run wire soon, and those are good ideas!"

kim whitmyre replied Nov 28, 2010 to Wire Runs

8 Dec 5, 2015
Reply by dennis schneider

"Re the rusted bolt heads: if you don't take them out (no need if it is just the bolt…"

kim whitmyre replied Nov 28, 2010 to help...rust

16 Dec 15, 2010
Reply by adriano meis

"Just checking. . . ;~) I will continue with my (and your) approaches. Natural or pai…"

kim whitmyre replied Nov 28, 2010 to Teak: leave alone or finish? (Boatsmith)

4 Nov 29, 2010
Reply by Ron Hall

"For sure! I'd say pay attention to your cabin hatches: the ability to stay dry insid…"

kim whitmyre replied Oct 27, 2010 to tiki 26 blue water

5 Nov 26, 2010
Reply by paul anderson

"Get on over to the "official" Wharram site and join the forums. Read, in particular,…"

kim whitmyre replied Oct 27, 2010 to tiki 26 blue water

5 Nov 26, 2010
Reply by paul anderson

RSS

© 2024   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service