I just saw your mail asking about painting the waterline:
Just buy a cheap laser-level,
Set your boat level in length and athwartship, this is very important!
Set your laser halfway the length of the boat and point at the hull and set the hight on the waterline-height. Mark these points with painters-tape
Move your laser more to the bow and the stern; but watch for the right height! Repeat the pointing at the hull.
Do the same at the other side of the hull. Use the hieights at the bow and stern to set your laser at the right height
Work in the dark moments of the day: a cheap laser is not as bright as you’ld like it to be ….Good luck ….
PS you can mail me directly at bert.van.baar@kpnmail.nl
I just saw your mail asking about painting the waterline:
Just buy a cheap laser-level,
Set your boat level in length and athwartship, this is very important!
Set your laser halfway the length of the boat and point at the hull and set the hight on the waterline-height. Mark these points with painters-tape
Move your laser more to the bow and the stern; but watch for the right height! Repeat the pointing at the hull.
Do the same at the other side of the hull. Use the hieights at the bow and stern to set your laser at the right height
Work in the dark moments of the day: a cheap laser is not as bright as you’ld like it to be ….Good luck ….
PS you can mail me directly at bert.van.baar@kpnmail.nl
No comments yet!
You need to be a member of Wharram Builders and Friends to add comments!
Wharram Builders and Friends
A Photo & Discussion Forum for Wharram Design Enthusiasts
Pavel Grund's Comments
Comment Wall (2 comments)
Just buy a cheap laser-level,
Set your boat level in length and athwartship, this is very important!
Set your laser halfway the length of the boat and point at the hull and set the hight on the waterline-height. Mark these points with painters-tape
Move your laser more to the bow and the stern; but watch for the right height! Repeat the pointing at the hull.
Do the same at the other side of the hull. Use the hieights at the bow and stern to set your laser at the right height
Work in the dark moments of the day: a cheap laser is not as bright as you’ld like it to be ….Good luck ….
PS you can mail me directly at bert.van.baar@kpnmail.nl
Just buy a cheap laser-level,
Set your boat level in length and athwartship, this is very important!
Set your laser halfway the length of the boat and point at the hull and set the hight on the waterline-height. Mark these points with painters-tape
Move your laser more to the bow and the stern; but watch for the right height! Repeat the pointing at the hull.
Do the same at the other side of the hull. Use the hieights at the bow and stern to set your laser at the right height
Work in the dark moments of the day: a cheap laser is not as bright as you’ld like it to be ….Good luck ….
PS you can mail me directly at bert.van.baar@kpnmail.nl
You need to be a member of Wharram Builders and Friends to add comments!
Join Wharram Builders and Friends
Welcome to
Wharram Builders and Friends
Sign Up
or Sign In
Or sign in with:
© 2024 Created by Budget Boater. Powered by
Badges | Report an Issue | Terms of Service