Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

Graham Jackson's Comments

Comment Wall (3 comments)

At 8:51am on March 23, 2019, Maris Ahmed said…

Good Day,

How is everything with you, I picked interest on you after going through your short profile and deemed it necessary to write you immediately. I have something very vital to disclose to you, but I found it difficult to express myself here, since it's a public site.Could you please get back to me on:( mrsstellakhalil5888@gmail.com ) for the full details.

Have a nice day

Thanks God bless


At 1:42am on November 2, 2020, David Kamper said…

Himemoa beams :

Hi Graham

I made the beams 3400mm wide, a little wider than standard i believe ..

The Ali tubes were 150mm diameter and 5mm thick wall , a bit of an overkill but would never fail 

Had a local Ali boat building firm weld them up for me ..

i  also used50mm tybe for bow and stern to hang nets off and a sort of dolphin catcher on bow tube ..   

At 1:41pm on November 2, 2020, David Kamper said…

I didnt weight beams and original beams were gone when i restored her..

I now have another project a tiki 21 and those wooden beams I would say are approx same weight. or Ali  a little lighter..

You need to be a member of Wharram Builders and Friends to add comments!

Join Wharram Builders and Friends

© 2022   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service