Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

Thumb cleat tor block for the mainsheet traveler.

Rating:
  • Currently 5/5 stars.

Views: 223

Albums: Marc and Leigh LaFrance Tiki 30
Favorite of 1 person

Comment by Ricardo Aráoz on October 3, 2015 at 1:36pm

Nice idea. Please take a picture when the traveler is on so we can see how it works. Won't it chafe with the beam edge?

Comment by Marc LaFrance on October 3, 2015 at 2:28pm

I'm going to lash a block around the beam. The cleat is only to keep the lashing from sliding inward, from the pull of the traveler.

Comment by paul anderson on October 4, 2015 at 4:23pm

The quality of your workmanship is great.

Comment by Marc LaFrance on October 5, 2015 at 9:11am

Thanks Paul. Truth is that shortly after starting my build, I discovered a couple of medical issues that have led to many doctors visits, tests and procedures for the past 4 or so years. Also did an exemplary job of breaking my left thumb last year, to the tune of 50 K !  My mountain of medical debt leaves me with a trickle of boat money and lots of time to " polish the turd " as it comes in. Enough of that whine. Hell bent on launching next year. 

I've watched your build and think that you've done a great job as well. I'm just deficient at communication and using social media.  Working on it.

Comment by john james on October 27, 2015 at 9:40am

Hey Mark Im back for more help on Wharrams remedial boatbuilding course. I'm preparing to drill the holes through my rudder to attach it to the transom. My plans indicate and inset of about 3/16 of an inch.whare the  Hinge lashings attach-- It looks to me like you did not . I have always sidestepped my curiosity about this indentation. Seems like it weakens the attachment and I'm not sure I see much purpose to it??? I've got the indentations in the hole but not the rudder yet.

Comment by john james on October 27, 2015 at 9:45am

Got the indentations in the stern transom but not the rudder as yet

Comment by Ricardo Aráoz on October 27, 2015 at 10:27am

I think the indentations are meant so that wood lies upon wood and not the lashings. So the lashings just hold the pieces together but dont get squashed between them (leading to more chafe than necessary). I think both indentations together make up the width of the lashings.

Comment by john james on March 11, 2016 at 10:21am

Hi Mark good morning to you Im back again this time to ask you if you're happy with the dimensions of your aft traveler beam, what are the dimensions and is it solid wood or box construction? Seeing how good it looks on your boat I would like one too. As always thanks again. Have you got a launch date in mind?

Comment by Marc LaFrance on March 13, 2016 at 12:21pm

Hey John, 

Just got back into town. Aft beam seems solid enough. Only supporting solar panels on one side and hanging blocks for the bottom end of the ladder on the other. It's a Doug Fir box with a chamfer piece under the top and the ends filled. I'll try to add drawing.

I wish that I had a little more clearance to the tillers. i can get about 45 degree rudder angle before the tillers touch the top. We'll see.

I hope that I do get to launch, someday.?

Comment

You need to be a member of Wharram Builders and Friends to add comments!

Join Wharram Builders and Friends

© 2024   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service