A Photo & Discussion Forum for Wharram Design Enthusiasts
I single handedly took down the mast yesterday.It was a bit tricky but luckily there are some trees which assisted in the mast lowering.
When i raised the mast a few years ago I must have damaged the foot of the mast.This allowed water rain to ingress and swell the timber at the foot,splitting the glass.With this in mind I will glue a rubber strip to the bottom of the mast after replacing the damaged timber.Although I may cut 5mm off the base of the mast and glue on a hardwood ''shoe'' to protect the softwood at the base of the mast.
Other than that the mast and synthetic rigging has weathered well.
Tags:
© 2024 Created by Budget Boater. Powered by