Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

We are about to put some new deck fittings on the boat and need to reinforce the existing decks where they will go. 

The hull decks are foam sandwich and the pod decks are balsa sandwich.  I believe that the way to deal with foam is to use an Allen key to pulverise it and then pour in an epoxy mix, but I have not found any guidance on what to do with balsa; any advice?

Thanks
Robert

Views: 102

Reply to This

Replies to This Discussion

I treat balsa the same way. You just want to have something that won't squish and will prevent water intrusion. David www.boatsmithfl.com

Reply to Discussion

RSS

© 2024   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service