Help with Raka anchor setup?!?! - Wharram Builders and Friends2024-03-29T05:04:40Zhttps://wharrambuilders.ning.com/forum/topics/help-with-raka-anchor-setup?commentId=2195841%3AComment%3A293500&feed=yes&xn_auth=noThanks for the reply Axel. It…tag:wharrambuilders.ning.com,2022-05-29:2195841:Comment:2935002022-05-29T00:07:58.239ZAlex parrishhttps://wharrambuilders.ning.com/profile/Alexparrish
<p>Thanks for the reply Axel. It was a build we picked up and was like this. I have since modified the setup and all is good! </p>
<p>Thanks for the reply Axel. It was a build we picked up and was like this. I have since modified the setup and all is good! </p> That looks very much like the…tag:wharrambuilders.ning.com,2020-04-10:2195841:Comment:1718492020-04-10T05:42:55.538ZAxelhttps://wharrambuilders.ning.com/profile/Axel
<p>That looks very much like the foremast case on a tiki 38. If so, the pad at the after end of the case is designed for a regular winch for the anchor rode. There should be a roller on one side of the cleat to hold the line clear of the case. I guess you could mount a windlass on that plate. FWIW the plans were revised on the T38 to add another layer of ply under the pad for reinforcement. </p>
<p></p>
<p>looks like a nicely built boat!</p>
<p>That looks very much like the foremast case on a tiki 38. If so, the pad at the after end of the case is designed for a regular winch for the anchor rode. There should be a roller on one side of the cleat to hold the line clear of the case. I guess you could mount a windlass on that plate. FWIW the plans were revised on the T38 to add another layer of ply under the pad for reinforcement. </p>
<p></p>
<p>looks like a nicely built boat!</p>