Bulkhead 3 fits ?? Or not - makeshift bearer needed? - Wharram Builders and Friends2024-03-29T08:01:40Zhttps://wharrambuilders.ning.com/forum/topics/bulkhead-3-fits-or-not-makeshift-bearer-needed?groupUrl=tiki30&xg_source=activity&feed=yes&xn_auth=noThanks Gottfried you’ve been…tag:wharrambuilders.ning.com,2021-01-14:2195841:Comment:2491042021-01-14T15:54:49.027ZPaolo Stellahttps://wharrambuilders.ning.com/profile/PaoloStella
<p>Thanks Gottfried you’ve been of great help and consolation for</p>
<p>my angered engineer’s soul. I’ll try and minimize discrepancies filling</p>
<p>with epoxy where needed. I’ll use this discussion to post more photos as I </p>
<p>make progress . If you will you could alert me if you see anything wrong .<br/>thanks again . All the best.</p>
<p>Paolo</p>
<p>Thanks Gottfried you’ve been of great help and consolation for</p>
<p>my angered engineer’s soul. I’ll try and minimize discrepancies filling</p>
<p>with epoxy where needed. I’ll use this discussion to post more photos as I </p>
<p>make progress . If you will you could alert me if you see anything wrong .<br/>thanks again . All the best.</p>
<p>Paolo</p> dear Paolo,
it understand, th…tag:wharrambuilders.ning.com,2021-01-14:2195841:Comment:2488502021-01-14T15:07:19.104ZGottfried Winterhttps://wharrambuilders.ning.com/profile/GottfriedWinter
<p>dear Paolo,</p>
<p>it understand, thanks for the photos. I think the solution 2 will work because the floor is also fixed by the sidewalls with the epoxy seam.</p>
<p>I again checkt my photos from this working stage, but I can´t remember that situation. during assembling you will be faced with a lot of tolerances which, most of them, can be solved by a little bigger gluing seam. </p>
<p>So I hope I could help you a little bit. keep on doing and have fun with your boat. attached I send you…</p>
<p>dear Paolo,</p>
<p>it understand, thanks for the photos. I think the solution 2 will work because the floor is also fixed by the sidewalls with the epoxy seam.</p>
<p>I again checkt my photos from this working stage, but I can´t remember that situation. during assembling you will be faced with a lot of tolerances which, most of them, can be solved by a little bigger gluing seam. </p>
<p>So I hope I could help you a little bit. keep on doing and have fun with your boat. attached I send you the photo what I found about my BH3 situaiton <br/>many greating </p>
<p>Gottfried</p> tag:wharrambuilders.ning.com,2021-01-13:2195841:Comment:2480352021-01-13T16:04:36.775ZPaolo Stellahttps://wharrambuilders.ning.com/profile/PaoloStella
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/8419320457?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8419320457?profile=RESIZE_710x" class="align-full"/></a></p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/8419320457?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8419320457?profile=RESIZE_710x" class="align-full"/></a></p> tag:wharrambuilders.ning.com,2021-01-13:2195841:Comment:2480342021-01-13T16:03:47.861ZPaolo Stellahttps://wharrambuilders.ning.com/profile/PaoloStella
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/8419318489?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8419318489?profile=RESIZE_710x" class="align-full"/></a></p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/8419318489?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8419318489?profile=RESIZE_710x" class="align-full"/></a></p> It’s a pity after putting the…tag:wharrambuilders.ning.com,2021-01-13:2195841:Comment:2481302021-01-13T16:01:46.440ZPaolo Stellahttps://wharrambuilders.ning.com/profile/PaoloStella
<p>It’s a pity after putting the drawings on cad the matching curvature of the lower sides over the bulkheads is</p>
<p>one of the few things I didn’t check. I hate “fixes” but I may have to live with</p>
<p>this one since everything else checks. Here are some pictures of the stitching</p>
<p>process. Thank you!</p>
<p>It’s a pity after putting the drawings on cad the matching curvature of the lower sides over the bulkheads is</p>
<p>one of the few things I didn’t check. I hate “fixes” but I may have to live with</p>
<p>this one since everything else checks. Here are some pictures of the stitching</p>
<p>process. Thank you!</p> tag:wharrambuilders.ning.com,2021-01-13:2195841:Comment:2481292021-01-13T15:54:28.448ZPaolo Stellahttps://wharrambuilders.ning.com/profile/PaoloStella
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/8419303897?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8419303897?profile=RESIZE_710x" class="align-full"/></a></p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/8419303897?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8419303897?profile=RESIZE_710x" class="align-full"/></a></p> This is the fix invented by m…tag:wharrambuilders.ning.com,2021-01-13:2195841:Comment:2481282021-01-13T15:53:02.494ZPaolo Stellahttps://wharrambuilders.ning.com/profile/PaoloStella
<p>This is the fix invented by my friend:<a href="https://storage.ning.com/topology/rest/1.0/file/get/8419300687?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8419300687?profile=RESIZE_710x" class="align-full"/></a></p>
<p>This is the fix invented by my friend:<a href="https://storage.ning.com/topology/rest/1.0/file/get/8419300687?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8419300687?profile=RESIZE_710x" class="align-full"/></a></p> tag:wharrambuilders.ning.com,2021-01-13:2195841:Comment:2481272021-01-13T15:47:23.068ZPaolo Stellahttps://wharrambuilders.ning.com/profile/PaoloStella
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/8419289872?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8419289872?profile=RESIZE_710x" class="align-full"/></a></p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/8419289872?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8419289872?profile=RESIZE_710x" class="align-full"/></a></p> As you can see there is space…tag:wharrambuilders.ning.com,2021-01-13:2195841:Comment:2481232021-01-13T15:45:30.981ZPaolo Stellahttps://wharrambuilders.ning.com/profile/PaoloStella
<p>As you can see there is space under the bulkhead For it to slide down</p>
<p>on the backbone and the bearer would be flush with the top of the backbone.</p>
<p>However the bulkhead is already sitting on both chines On the sides and thus cannot move down any</p>
<p>further. </p>
<p>As you can see there is space under the bulkhead For it to slide down</p>
<p>on the backbone and the bearer would be flush with the top of the backbone.</p>
<p>However the bulkhead is already sitting on both chines On the sides and thus cannot move down any</p>
<p>further. </p> Thank you so much for you rep…tag:wharrambuilders.ning.com,2021-01-13:2195841:Comment:2480302021-01-13T15:39:46.339ZPaolo Stellahttps://wharrambuilders.ning.com/profile/PaoloStella
<p>Thank you so much for you reply <em>Gottfried </em>here are some pictures </p>
<p>showing my hull and a fix invented by my friend who built a 30 years ago.</p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/8419277093?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8419277093?profile=RESIZE_710x" class="align-full"/></a></p>
<p>Thank you so much for you reply <em>Gottfried </em>here are some pictures </p>
<p>showing my hull and a fix invented by my friend who built a 30 years ago.</p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/8419277093?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8419277093?profile=RESIZE_710x" class="align-full"/></a></p>