Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

Chuck Valley's Discussions (171)

Discussions Replied To (160) Replies Latest Activity

"Instead of an 8:1 scarf joint, you could use a half lap joint.    "

Chuck Valley replied Jul 9, 2015 to gluing simultaneus long scarfs (coller simultanément des scarfs de grande longueur) a machine for

6 Jul 10, 2015
Reply by Blanc Jean-Paul

"Make sure that the saw blade tilts away from the fence, not towards it!"

Chuck Valley replied Jul 7, 2015 to About the wood triangular section

3 Jul 7, 2015
Reply by Éric Bouvéron

"Usually, it's a 50/50 mix of tung oil and either orange oil or turpentine. Tung oil…"

Chuck Valley replied Jul 5, 2015 to ANYONE USED DANISH OIL?

3 Feb 21, 2016
Reply by Robert Hughes

"We are building a 38. Tools we use (as many as you can afford): Bevel Square, multit…"

Chuck Valley replied Jun 30, 2015 to Pitfalls and Learnings

14 Jul 3, 2015
Reply by Allen Bosely

"I'm planning on sailing around the world in 1825 days, with bunk, maybe GPS, shoes o…"

Chuck Valley replied Jun 28, 2015 to Around the world in a sport cat

2 Jun 28, 2015
Reply by Brad Ingram

"I always appreciate your videos!"

Chuck Valley replied May 22, 2015 to A good film, from Balkan Shipyards...

2 May 22, 2015
Reply by rael dobkins

"Plastic nails did not penetrate thick marine plywood. Try before you buy............…"

Chuck Valley replied May 5, 2015 to Why nails with epoxy?

40 Jul 13, 2015
Reply by Rogerio Martin

"Clamps are wonderful.............providing you have enough clamps. Look at my websit…"

Chuck Valley replied May 4, 2015 to Why nails with epoxy?

40 Jul 13, 2015
Reply by Rogerio Martin

"Then just do your best to have the end grain vertical. Good Luck!"

Chuck Valley replied Apr 15, 2015 to Help Picking 4x8x20 Douglas Fir to Resaw for Tanenui Build

6 Apr 19, 2015
Reply by kim whitmyre

"I pick wood by looking at the end of the boards. If the wood grain runs perpendicula…"

Chuck Valley replied Apr 14, 2015 to Help Picking 4x8x20 Douglas Fir to Resaw for Tanenui Build

6 Apr 19, 2015
Reply by kim whitmyre

RSS

© 2021   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service