Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

In a small bay on the north coast of Brittany, somewhere east of Roscoff.

Rating:
  • Currently 0/5 stars.

Views: 229

Albums: Bell Acqua
Favorite of 1 person

Comment by paul anderson on July 9, 2015 at 3:38pm

Good work mate,you going to stick with the one stick now?

Comment by Ian on July 9, 2015 at 4:44pm

 Photos: very interesting and imaginative conversion. I think that must be one of the best ways of doing it if you want to cover the centrecockpit space.

Re the beam  and block discussion, I have epoxied and varnished mine so any rot can be identified straight away rather than being hidden under paint.

They will need a little maintenance for that but that is a deliberate action on my part. There's no other brightwork on the boat other than the tillers and tillerbar.

So how does the boat sail with the new rig?

Comment by Richard Fruehmann on July 9, 2015 at 5:00pm

For coastal sailing the sloop rig has the advantage of leaving the after deck clear (apart from the gargantuan engine enclosure!). She sails easily despite the very far forward rig, though I had no direct comparison with other similar craft. For longer passages I would consider returning to the schooner rig because it offers more options in heavy weather. Unfortunately I won't be doing this any time soon since I sold the boat to a lovely family last month, myself having taken on a new job abroad.

I agree with your point Ian about not concealing rot prone areas with paint, although I didn't follow that course myself.

Comment by Ian on July 11, 2015 at 6:36pm

Thanks for that: I have retained schooner rig as per design apart from adding approx 250 mm to mainmast for a little bloke like me to look underneath mainsail. I am mostly concerned about the options for heavy weather.

Comment

You need to be a member of Wharram Builders and Friends to add comments!

Join Wharram Builders and Friends

© 2024   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service