Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

Rogerio Martin's Comments

Comment Wall (31 comments)

At 12:56pm on March 22, 2011, paul anderson said…
beautiful photos
At 5:40am on April 11, 2011, Marc LaFrance said…

Thaank you for the kind comment Rogerio, but you are my envy. You are sailing! It appears that you have a great boat and a happy crew. Also looks like good sailing grounds.

Marc

At 5:51am on May 10, 2011, Marc LaFrance said…

Thanks for adding me as a friend. Glad to see that you're planning on a Tiki 30. The further that I progress with mine, I find that there is enough room to make a truly comfortable cruiser for two.

Marc

At 3:24pm on May 19, 2011, Duncan Clausen said…
Hi Rogerio, thanks for the friend request. I will respond a little later regarding the Tiki 30 masts.
At 3:38pm on May 19, 2011, paul anderson said…
rogerio will rick become a sea dog?
At 1:37pm on May 23, 2011, paul anderson said…
nice work rogerio you will be finished in no time at all.
At 3:34am on June 14, 2011, Capgeraldo said…

good pictures

thks. C.

At 7:48am on July 3, 2011, Marc LaFrance said…

Rogerio,

Been following your progress. Looks great. You'll probably finish before I do!

Thanks for the pictures.

At 12:19pm on July 4, 2011, Marc LaFrance said…

I am going to install an Air Head on the riser at the aft end of the starboard hull.

We'll rig a curtain for privacy.

At 8:36am on August 4, 2011, Polinesio - Tarcisio Silva said…

Hi Roger,

Yes we are friends, so near and so far!

About the current theme, Polinésio use a Lavac system, it's a great solution.

Cheers,

Tarcisio Silva.

Polinesio Catamarans

design & construção

www.polinesio.net

At 6:18pm on June 8, 2012, REMO said…

VÇ TA MORANDO NO BRASIL OU TA FORA

 

ABS

REMO

At 7:58pm on August 2, 2012, Ricardo Aráoz said…

Ola Rogerio, gracias por la oferta de amistad. Y por el consejo, lo tendré muy en cuenta. Estoy siguiendo tu blog de construcciòn, muy bueno, y me va a resultar muy ùtil cuando comienze el mìo. Saludos.

At 9:10am on August 20, 2012, Ricardo Aráoz said…

Hola Rogerio, veo que todavía no has empezado tu mástil. Mira la conversación en "HITIA 17 - ALTERNATIVE MAST CONSTRUCTION", es la forma en que pienso hacer el mio. Cuál es tu opinión?

At 9:51am on August 20, 2012, Rogerio Martin said…

Olá Ricardo, este mastro do Hitia é mais dificil de fazer do que o do projeto original. E precisa de uma base na mesma forma do mastro. Já temos um gabarito em L com 10m para fazer nosso mastro como no projeto. Mas o masto do Hitia vc encontra tubos de aluminio T6061 de 4" com 6m no mercado, só fazer um pé e top de mastro.

At 5:01pm on August 20, 2012, Ricardo Aráoz said…

Hola Rogerio, el mástil Noble no precisa de ninguna base especial, es "self-jigging". Una vez que juntas las partes el mástil se mantiene derecho por sí mismo. Una vez encolado el mástil toma su forma y simplemente le pongo apoyos por las dudas.

Pero si ya tienes armado tu armazón para hacer el mástil entonces es mejor que sigas adelante.

Saludos.

At 11:28pm on May 7, 2013, Anthony Curtis Collison said…

Anthony Collison Raka was made to be a little faster i had a friend in Florida who made 1 I was always ready to sail with hm and his wife,I envied his boat very much.its a little narrower less living space,if you want more comfort Tangaroa would be best between the 2

At 10:59am on May 24, 2013, Trevor McKenzie said…

Hi Rogerio,
Thanks for your kind comment. Just had a look at your two boats, very nice, love the Melenesia, great colours and practical changes to original plans, looks really smart.
Cheers Trevor

At 4:53pm on August 6, 2013, paul anderson said…

Rogerio, can you tell me about your anchor, do you use a bridle, how heavy, how do you attach the rode to the boat etc.

cheers paul

At 5:34pm on August 6, 2013, Rogerio Martin said…

No I don't use a bridle, We build one suport, witch the same anchor size, in middle of frontbeam. I use 7,5kg Bruce + swivel + 10m of 8mm chain + 50m 12mm Three-Strand Anchor Lines

We build a chain box and all boat is fixed there in one big Heavy-Duty Open Base Cleat. This cleat is screwed with 4x 10mm ss screw in one big cross under the chain box cover. 

When we opt for this arrangement, the power was distributed between the two beams and the chain box

We have one suport for anchor and another for moring 

At 11:26am on December 24, 2013, Charles Eugene Marie said…

Hello Roger. Thank you for you help . There are just a problem; I think a automatique translator was used, and it is almost impossible to understand the meaning of you comment. Never mind, anyway,I will stretch my English language. It could be better  in preparation of my futur trip

You need to be a member of Wharram Builders and Friends to add comments!

Join Wharram Builders and Friends

© 2024   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service