A Photo & Discussion Forum for Wharram Design Enthusiasts
Stripped Beam
I used Peelaway 7 stripper (left for 72hrs) to remove all the paint. After neutralising, I pressure washed the beam. I needed to get back the the wood to make sure there's no rot, and so I can confidently paint using 2 pack epoxy.
Views: 135
-
Comment by Robert Hughes on March 19, 2014 at 2:46pm
-
Looks like you're doing a really thorough job!
-
Comment by Ian Bamsey on March 19, 2014 at 2:55pm
-
It takes about 15 mins per side to apply Peelaway stripper. Add 20 mins removing the muck and cleaning with the pressure washer, to give 35 mins total. Although Peelaway is expensive it's actually a quick way to prep the beam.
And ... I'm only planning on painting this boat once!
Comment
© 2024 Created by Budget Boater.
Powered by
You need to be a member of Wharram Builders and Friends to add comments!
Join Wharram Builders and Friends