Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

Hull glassed to near the lashing holes, fibreglass weave filled up and filler coat cured and now for the sanding, sanding sucks!

Rating:
  • Currently 0/5 stars.

Views: 161

Comment by Peter Brook on November 10, 2013 at 2:39pm

Are you building inside the house??  If so - perfect for building, not so good for domestic bliss with the significant other....

Comment by Shaun on November 10, 2013 at 3:43pm
Ahhh, yep, inside the house but believe it or not it is my in-laws house, in fact it is the spare room/guest room. At the start when the cooler weather moved in I did a bunch of measurements and then Casey (wife) and I worked our way from this room through the doors checking as much as possible and I knew it would be close,...if I did not fit the decks downstairs. We did a test run a couple of days ago, width wise it clears on the angles by a couple of inches, with decks fitted it would be a no-go, length wise getting through the first door, up some stairs and through a big cactus in a pot it clears with less than an inch and that is with lifting my end up full stretch to give a bit of angle, I was sweating diamonds at that point!!!
Comment by Peter Brook on November 11, 2013 at 2:30am

Impressed!  We are lucky to have plenty of space and will build a simple shed, but I have been told it must be well away from the house!  Maybe get a little motorbike so I don't miss much time returning for meals!  Always an excuse for mischief somewhere if you look hard enough.

Well done on build so far, looks very nice.  Keep the pictures going.

Comment

You need to be a member of Wharram Builders and Friends to add comments!

Join Wharram Builders and Friends

© 2024   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service