Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

Fixing the sheer stringer to the side panels - Wharram Hitia 14 Ep.17

In this video I am fixing the sheer stringer to the side panel. I first prepare the scarf joints, after that I prime the surface of the side panel and one side of the sheer stringer with unthickened epoxy and after that I thicken the epoxy with cotton fibre and apply it on the sheer stringer with a notched spreader. I then place the sheer stringer and nail it down. I will try to remove the brass pins on one of the next days. I am not hitting the brass pins lower, so that they are easier to remove later, and I can see and feel the pressure is already enough (the epoxy is pushed out from the sides of the sheer stringer).

Rating:
  • Currently 0/5 stars.

Views: 14

Comment

You need to be a member of Wharram Builders and Friends to add comments!

Join Wharram Builders and Friends

© 2018   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service