Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

TIKI 30 Discussions (33)

← Back to TIKI 30
Discussions Replies Latest Activity

custom motor well

I wanted  to change my motor in the way boatsmith had done, with controlls by rope like the tiki 30 nostromo. the fueltank and battery are…

Started by Bart

0 2 hours ago

Strap VS Rope Lashing

"I'm concerned about crossbeam connections to the hull on the 30 footers  tiki 30. Up to now I've been planning to lash it with rope in the…

Started by john james

13 Apr 20
Reply by Rogerio Martin

Chain Size recommendations

Hi guys, I'm looking for informations regarding Chains size to be used on a Tiki30.... G4/G43... would be the choice.... Also what length w…

Started by Capt. Lucky

0 Jan 15

Tiki 30 building height

Hi All, Thanks for accepting my request to join the wharrambuilders site! I have been looking at building a boat to cruise the world in, wi…

Started by braybay

3 Jun 4, 2019
Reply by Rob and Beth Boase

Going to windward

I saw a message about tacking and hobby horsing from Nigel Darbyshire but could not find the thread or work out how to reply to it so: Hi N…

Started by Robert Sheridan

4 Oct 6, 2018
Reply by Dave

Speed, Going to wind and reefing

How fast is a tiki 30 really? I saw, that I can reach 50% of the windspeed under nearly all conditions. The fastest Speed I saw on my gps w…

Started by SoLong

4 Oct 5, 2018
Reply by Robert Sheridan

Harken Roller Furling units

Hi Everyone, I am having Tiki 30 (#221) built and would like to know which model Harken Roller Furling unit people use on the Jibs. I see a…

Started by Steve Williams

11 Jul 9, 2018
Reply by boatsmith

Tiki 30 - Gaps for bulkheads 1 and 7?

Hi all, Rainy day, so I'm checking the plans trying to get ahead of the construction and I have a big doubt. In the assembly booklet (page…

Started by Ricardo Aráoz

2 Jul 29, 2016
Reply by Edward Wolfe

Crossbeams

As I am building my crossbeams I came across one question that I cannot quite figure out: I understand that the center crossbeam is open be…

Started by Ralf

4 Nov 23, 2015
Reply by Ricardo Aráoz

Mast Rake

Some time ago somebody was asking about mast rake. I was worried about this too because I had found absolutely nothing in the plans. Well I…

Started by Ricardo Aráoz

1 Oct 31, 2015
Reply by john james

RSS

© 2020   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service