Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

Wondering if anyone had the experience of reducing the thickness of Ply to lose weight at a Tiki 21
thx

Views: 735

Replies are closed for this discussion.

Replies to This Discussion

Thanks Kristian,

Best

The ply rudders weight very little. I think the tiller arms and the link arm weight more. If you want to go so fast, why build a Wharram? The Tiki 21 is a great coastal boat and great for exploring rivers, it's quite fast enough for it's design purpose.

Never enough!

Best

Richard Woods built some of his designs in 4mm ply for racing and they have lasted well apparently. But I agree with Ian, if you are going to start from scratch, better to build a boat designed for performance not cruising.

Yes, maybe
but, Tiki 21 has some very nice features
I intend to have a fast cruise
I am exploring some possibilities
best regards
Thanks

For me, I could save more time than I could gain through performance, by teaching the family how to get packed and in the car a bit quicker!

Teaching the family how to get packed and in the car a bit quicker!
It is another form of performance.
Ultimately the performance is a combination of factors .
Best
Thanks

my advice is the short trouser , easy to put on and faster , for all the family,  an lighter ?

RSS

© 2018   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service