tiller length- amount of rudder swing - Wharram Builders and Friends2024-03-29T10:09:09Zhttp://wharrambuilders.ning.com/forum/topics/tiller-length-amount-of-rudder-swing?commentId=2195841%3AComment%3A143971&feed=yes&xn_auth=noHi Curt, on my boat, the tril…tag:wharrambuilders.ning.com,2016-07-25:2195841:Comment:1439712016-07-25T07:19:21.175ZBarthttp://wharrambuilders.ning.com/profile/Bart
Hi Curt, on my boat, the trillers are about 5 cm above the beam, andere 15 tot 20 cm below top of cabine. I find tthis Nice for stteering, tour elbow rest on the beam . with your arm up with no support Gets heavy.<br />
Good luck with the build!<br />
Bart
Hi Curt, on my boat, the trillers are about 5 cm above the beam, andere 15 tot 20 cm below top of cabine. I find tthis Nice for stteering, tour elbow rest on the beam . with your arm up with no support Gets heavy.<br />
Good luck with the build!<br />
Bart yep- I mocked it all up coupl…tag:wharrambuilders.ning.com,2016-07-24:2195841:Comment:1437642016-07-24T22:35:28.801Zcurt goodnighthttp://wharrambuilders.ning.com/profile/curtgoodnight
<p>yep- I mocked it all up couple days back and figured they need to be max length and i increased the angle to bring them up closer to cabin top height for that very reason. </p>
<p>thanks Bart!</p>
<p>yep- I mocked it all up couple days back and figured they need to be max length and i increased the angle to bring them up closer to cabin top height for that very reason. </p>
<p>thanks Bart!</p> They need tot be at max lengt…tag:wharrambuilders.ning.com,2016-07-24:2195841:Comment:1437612016-07-24T22:28:40.230ZBarthttp://wharrambuilders.ning.com/profile/Bart
They need tot be at max length, otherwise the connectionrod between the helms will be tot far aft to hold on to. Regards, Bart
They need tot be at max length, otherwise the connectionrod between the helms will be tot far aft to hold on to. Regards, Bart The angle of the tiller is de…tag:wharrambuilders.ning.com,2016-07-21:2195841:Comment:1437512016-07-21T01:35:55.545Zpatrick lennonhttp://wharrambuilders.ning.com/profile/patricklennon
The angle of the tiller is determined by the placement of the cheek books on the rudder ...that is for the tiki 26
The angle of the tiller is determined by the placement of the cheek books on the rudder ...that is for the tiki 26 thanks Patrick- I sure believ…tag:wharrambuilders.ning.com,2016-07-20:2195841:Comment:1437492016-07-20T18:09:31.887Zcurt goodnighthttp://wharrambuilders.ning.com/profile/curtgoodnight
<p>thanks Patrick- I sure believe i have pored over my plans and cannot find either angle or height for tiller---length and curvature, yes- but, curiously, not the others... </p>
<p></p>
<p>thanks Patrick- I sure believe i have pored over my plans and cannot find either angle or height for tiller---length and curvature, yes- but, curiously, not the others... </p>
<p></p> Not sure for the Tiki 30 but…tag:wharrambuilders.ning.com,2016-07-20:2195841:Comment:1439362016-07-20T08:03:39.620Zpatrick lennonhttp://wharrambuilders.ning.com/profile/patricklennon
<p>Not sure for the Tiki 30 but the 26 building plans were very accurate for the length and height of tiller. Imho the range of motion for the tiller should be 180 degrees. If it was less because of tension in the rudder lashings it could put strain on the lashings. Cheers Pat</p>
<p> </p>
<p>Not sure for the Tiki 30 but the 26 building plans were very accurate for the length and height of tiller. Imho the range of motion for the tiller should be 180 degrees. If it was less because of tension in the rudder lashings it could put strain on the lashings. Cheers Pat</p>
<p> </p> thanks so much!tag:wharrambuilders.ning.com,2016-07-20:2195841:Comment:1437412016-07-20T00:22:40.952Zcurt goodnighthttp://wharrambuilders.ning.com/profile/curtgoodnight
<p>thanks so much!</p>
<p>thanks so much!</p>