Tiki 30 dolphin striker - Wharram Builders and Friends2024-03-29T08:52:14Zhttp://wharrambuilders.ning.com/forum/topics/tiki-30-dolphin-striker?commentId=2195841%3AComment%3A84292&feed=yes&xn_auth=noAlways do at least what is in…tag:wharrambuilders.ning.com,2012-10-16:2195841:Comment:840842012-10-16T01:04:45.782ZAnn and Neville Clementhttp://wharrambuilders.ning.com/profile/AnnandNevilleClement922
<p>Always do at least what is in the plans. If you do more, try to make it light weight. You can always ask James and Hanneke. Good luck!</p>
<p>Always do at least what is in the plans. If you do more, try to make it light weight. You can always ask James and Hanneke. Good luck!</p> The weight of the mast has no…tag:wharrambuilders.ning.com,2012-10-15:2195841:Comment:842342012-10-15T22:48:42.981ZMarc LaFrancehttp://wharrambuilders.ning.com/profile/MarcLaFrance
<p>The weight of the mast has nothing to do with the compression from loading against the windward shrouds. The difference in weight is only an additional factor, but a minimal one at that. As Rogerio said " Don't eliminate "</p>
<p>The weight of the mast has nothing to do with the compression from loading against the windward shrouds. The difference in weight is only an additional factor, but a minimal one at that. As Rogerio said " Don't eliminate "</p> I agree with Rogerio,the forc…tag:wharrambuilders.ning.com,2012-10-15:2195841:Comment:840812012-10-15T18:22:01.597Zpaul andersonhttp://wharrambuilders.ning.com/profile/paulanderson
<p>I agree with Rogerio,the forces may be less but they will be repetitive.If anything it will give you peace of mind,</p>
<p>I agree with Rogerio,the forces may be less but they will be repetitive.If anything it will give you peace of mind,</p> Don't eliminate.tag:wharrambuilders.ning.com,2012-10-15:2195841:Comment:842922012-10-15T15:08:49.890ZRogerio Martinhttp://wharrambuilders.ning.com/profile/RogerioMartin
<p>Don't eliminate.</p>
<p>Don't eliminate.</p> My thought would be no......u…tag:wharrambuilders.ning.com,2012-10-14:2195841:Comment:842242012-10-14T21:27:25.141Zboatsmithhttp://wharrambuilders.ning.com/profile/qe0j3ojqb10
<p>My thought would be no......unless the beam were reinforced with significant composites. I am assuming you are planning on the stock sail plan. I<em>f you are planning on a marconi rig with that mast the loads will be quite a bit less and will require less reinforcement as the loads will be quite a bit less due to the reduced sail area. </em></p>
<p>My thought would be no......unless the beam were reinforced with significant composites. I am assuming you are planning on the stock sail plan. I<em>f you are planning on a marconi rig with that mast the loads will be quite a bit less and will require less reinforcement as the loads will be quite a bit less due to the reduced sail area. </em></p>