Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

Hello!

For me building the Tiki 21 and later sailing her both in Baltic and Adriatic sea was the most intense and interesting period of time, but new roads are ahead and therefore I let you know that super fit Tiki Itatae is looking for new friends & adventurers.

Itatae is build according to Wharram plans and has only minor modifications: main hatches (those are made as one-piece with hinges) and the main deck (plywood with stringers, reinforced with 3 layers of 200g fiberglass), also the mast is few inches longer than original in order to accommodate the gennaker/spinnaker.

She is treated with finest materials: West Systems epoxy, fillers & fiberglass / 6mm & 15mm Okume plywood / wooden parts are made of Douglas Fir, Hemlock & European oak / Itatae is protected by durable paints, such as poly-urethane Tikkurila Temadur 20, in some areas I used epoxy based Tikkurila Temacoat rm 40 as a primer and topcoat.

For the Adriatic sea expedition she received a fancy facelift on the hulls by Estonian renowned street-artist Lex Zooz.

Tiki Itatae is waiting for you in NE corner of Europe, Estonia – she is fitted everything you need to sail away (main with 2 reef lines, jib with 1 reef line, spinnaker).

You may offer your 18/17 foot beach catamaran for exchange. Your double-hull flying machine should be in excellent condition, preferably Topcat K1/K2 or Hobie Pearl with wing seats.

For further information please contact +372 56 88 0 949 // agur.paesuld@gmail.com

You will get a notion about Tiki Itatae condition and sailing  from the videos below:

TIKI TINY TRIP on Haapsalu bay (August 2018)

IN THE SEARCH OF A CLEAR SEA (September 2018)

Views: 119

Reply to This

© 2018   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service