Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

"I'm concerned about crossbeam connections to the hull on the 30 footers  tiki 30. Up to now I've been planning to lash it with rope in the old-fashioned way. Now that the time is here I don't see that it's going to be so easy…"Plans ask for webbing strap to go through a slot in the deck block then up around the crossarm beam.the cross beam support box below deck is the supporting foundation for everything.I  cannot see that there is any way to use rope to achieve the same support???Any thoughts on this /

Views: 2069

Replies to This Discussion

It looks like your boat was poorly built or took a hit. It wasn't supposed to fail there. As for the size of the crossbeams, you will have to decrease the beam of the boat by 10cm, 5 on each side. It will not change much.


© 2024   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service