Repair Tiller lashing holes - Wharram Builders and Friends2024-03-28T23:29:56Zhttp://wharrambuilders.ning.com/forum/topics/repair-tiller-lashing-holes?commentId=2195841%3AComment%3A158397&feed=yes&xn_auth=nojust had a good look at the h…tag:wharrambuilders.ning.com,2017-12-28:2195841:Comment:1583972017-12-28T11:37:15.825ZAndrew Cassinghamhttp://wharrambuilders.ning.com/profile/AndrewCassingham
<p><span>just had a good look at the holes, did have the go pro on charge but left it at home so no photos. looks like it was a void cut into the wood and filled with epoxy that has pulled out so will beach the boat, clean it all up and fill with some epoxy and a strip of hardwood on the trailing edge, re drill the holes and lash the rudders back on. Hopefully photos to follow</span></p>
<p><span>just had a good look at the holes, did have the go pro on charge but left it at home so no photos. looks like it was a void cut into the wood and filled with epoxy that has pulled out so will beach the boat, clean it all up and fill with some epoxy and a strip of hardwood on the trailing edge, re drill the holes and lash the rudders back on. Hopefully photos to follow</span></p> i would think that there is…tag:wharrambuilders.ning.com,2017-12-26:2195841:Comment:1586892017-12-26T10:29:51.591Zboatsmithhttp://wharrambuilders.ning.com/profile/qe0j3ojqb10
<p></p>
<p></p>
<p>i would think that there is probably some rotten wood happening in the stern post. First remove all bad wood and replace. </p>
<p>then rebuild the lashing holes. </p>
<p></p>
<p>If the rot is solely in the sterpost , then maybe just putty and several layers of glass might do it. pics?</p>
<p></p>
<p></p>
<p>i would think that there is probably some rotten wood happening in the stern post. First remove all bad wood and replace. </p>
<p>then rebuild the lashing holes. </p>
<p></p>
<p>If the rot is solely in the sterpost , then maybe just putty and several layers of glass might do it. pics?</p>